Appendix C: Technical Information Specifications
Distortion (THD + N)
(1 kHz, |
|
Mic mono: | <0.008% low gain |
Line mono: | <0.008% low gain |
Line stereo: | <0.008% at main out |
Main mix output noise
(1
Main mix level down, all channel levels down:
Main mix level 0 dB, all channel levels down:
Main mix level 0 dB, all channel levels 0 dB:
Frequency Response
(+0 |
|
Mic mono input: | < 10 |
Line mono inputs: | < 10 |
Line stereo inputs: | < 10 |
Connections
Mic input: | XLR balanced |
Line mono input: | 1/4” TRS balanced |
Line stereo input: | 1/4” TRS unbalanced |
Preamp main outputs: | 1/4” TRS balanced |
Monitor outputs: | 1/4” TRS balanced |
Loudspeaker outputs: | 1/4” TS and Neutrik Speakon |
Loudspeaker outputs
(Both channels loaded and driven at 1 kHz.)
Peak output power @ 4 Ω: 2 x 500 W peak
Average output power @ 4 Ω: 2 x 350 W rms, 1% THD
Average output power @ 8 Ω: 2 x 200 W rms, 1% THD
Recommended load impedance: 4 – 8 Ω per side
Internal Effects
Type: | Internal processor |
| mono in, stereo out |
Effects presets: | 16 |
Equivalent Input Noise (EIN)
Mic input (20 Hz – 20 kHz)
150 Ω termination:
Gain
Mic mono input: | 45 dB high gain |
| 25 dB low gain |
Line mono inputs: | 20 dB high gain |
| 0 dB low gain |
Line stereo inputs: | 0 dB |
Maximum Levels
Mic mono input: | |
| |
Line mono inputs: | +21 dBu low gain |
| +1 dBu high gain |
Line stereo inputs: | +21 dBu |
Preamp main and monitor outputs: +21 dBu
Impedances
Mic mono input: | 2.5 kΩ balanced |
|
Line mono input: | 20 kΩ balanced | Ω |
Main and monitor preamp outputs: 150 | ||
Unbalanced
Power Consumption
Dimensions
Height: | 11.67 in/296.4 mm |
Width: | 18.44 in/ 468.4 mm |
Depth: | 11.3 in/287 mm |
Weight
Net weight: | 22 lb/10 kg |
Disclaimer |
|
Since we are always striving boldly to make our products better by incorporating new and improved materials, components, and manufacturing methods, we reserve the right to change these specifi cations at any time without notice.
Please check our website in case there are any corrections and updates to this manual: www. tapcoworld.com.
©2008 LOUD Technologies Inc. All Rights Reserved.
Channel EQ
High Shelving: | +/- 15 dB @ 12 kHz |
Mid Peaking: | +/- 15 dB @ 2.5 kHz |
Low Shelving: | +/- 15 dB @ 80 Hz |
Main and Monitor 1: ±12 dB @ 125, 250, 500, 1 k, 2 k, 4 k, and 8 kHz
Dedication
The following trainee technical writers from Mr. Kelly’s class of 2007/2008, were involved in the production of this manual: Autumn, Barrie, Brendan, Caswell, Cormack, Emily, Eliza, Erin, Ethan, Isabella, Jilly, Jordan, Lily, Max, Mia, Read, Silas, Sol, Spencer, and Steven. Now they are moving up to 1st grade!
24