M-Audio manual Scenario 1 ProFire 2626 as Clock Master, Slave Adat a

ProFire 2626 User Guide 34

Scenario 1: ProFire 2626 as Clock Master

By selecting “internal” as the sync source in the Control Panel, you designate ProFire 2626 as the clock master. You will then need to select “external” (or “slave” on certain devices) mode on each of your other digital devices (this is usually an internal menu setting on that device).

In Figure 1 below, digital multi-track recorders with ADAT optical outputs are connected to optical ports A and B of the ProFire 2626, and a DAT machine is connected to the coaxial S/PDIF I/O. ProFire 2626 is selected as the master, and all of the other devices are set to “external” (or “slave”).

Slave (ADAT A)

In A	Out A
In B	Out B Master

12V DC

3.5A

— +

MIDI In A Out A 7 5 3 1

S/PDIF

Word Clock

8

	In BOut B 8	6	4	2
MIDI	Optical		Line Outputs
S/PDIF
Word Clock
	S/PDIF
	(RCA)

7	6	5	4	3	2	1
			Mic/Line Inputs

Slave (DAT) Slave (ADAT B)