Roland VS-1680 Off Rec, EFX1 effect insert switch, Snd effect send level, Rtn effect return level

The mastering tracks will not be used.

Play back tracks 1–16 and record on the mastering tracks.

Play back the mastering tracks. The sound of tracks 1–16 will not be output from the MASTER jacks.

Mix 16 tracks down to 2 tracks (Mastering Room)

fig.2-03

3.Press [ENTER (YES)].

4.Use [], [], [ ], and [ ] to move the cursor

to “Status.”

fig.2-18

5.Select the “Status” of the mastering tracks. Rotate the TIME/VALUE dial.

Status

Specify the status of the master tracks. For this example select “Off.”

Off:

Rec:

8.Use [], [], [ ], and [ ] to move the cursor.

Use the TIME/VALUE dial to make settings.

fig.2-20.e

Effect Insert Switch

Insert Return Level

Insert Send Level

EFX1 (effect insert switch 1)

Select how the effect will be connected.

Off: The effect will not be inserted.

Ins: The stereo effect will be inserted into both channels. The inserted effects are shown as icons and as patch names (up to ten characters).

Snd (effect send level)

Adjust the volume level of the signal that is sent to the insertion effect (-42–6 dB). By default, this will be “0 dB.”

Rtn (effect return level)

Adjust the volume level of the signal that is output from the insertion effect (-42–6 dB). By default, this will be “0 dB.”

9.Press [F1 (EFX1)].

Play:

MEMO

For details on the signal flow (routing) at this time, refer to Signal flow (routing) (p. 13).

6.Use [], [], [ ], and [ ] to move the cursor to “EFXIns.”

fig.2-19

10.Press [F2 (Sel)].

11.Use the TIME/VALUE dial to move the cursor to the

effect that you wish to use. For this example, select an effect such as “P210 MTK:Mixdown.”

fig.2-21

12.After selecting an effect, press [F4 (Exec)].

13.Press [F6 (EXIT)].

7.Press [ENTER (YES)].

12