Roland VS-1680 owner manual Copying mixer settings, F4 Exec or Enter YES, F6 Exit or Exit no

Page 36

Enhancements related to operation

Copying mixer settings

You can copy mixer settings (equalizer, level) from another channel to the channel currently shown in the Channel Edit page.

The following settings can be copied.

Equalizer

EQ low freq.

EQ low gain

EQ mid freq.

EQ mid gain

EQ mid Q

EQ high freq.

EQ high gain

Level

ATT

Phase

EFX1 insert send level

EFX1 insert return level

EFX2 insert send level

EFX2 insert return level

EFX3 insert send level

EFX3 insert return level

EFX4 insert send level

EFX4 insert return level

Fader

MASTER send pan

EFX1 send level

EFX1 send pan

EFX2 send level

EFX2 send pan

EFX3/AUX1 send level

EFX3/AUX1 send pan

EFX4/AUX2 send level

EFX4/AUX2 send pan

AUX/AUX3 send level

AUX/AUX3 send pan

1.Press [CH EDIT (SELECT)] for the copy-destination channel.

2.Press [PAGE] so that [F5] indicates “Copy,” and then press [F5 (Copy)].

fig.6-28

3.Use the TIME/VALUE dial to select the copy-source channel.

fig.6-29

NOTE

If the Channel Link setting is OFF for the copy-destination channel, the Channel Link setting of the copy-source channel will be considered as OFF even though it may actually be ON, and only the settings of individual channels will be copied. Similarly, when Channel Link is ON for the copy-destination channel, Channel Link of the copy-source channel will be considered to be ON even though it may actually be OFF, and the settings of both channels will be copied.

4.Use the function buttons to select the settings that will be copied.

[F1 (CpyEQ]: Copy only the equalizer settings.

[F2 (CpyLv]: Copy only the level settings.

[F4 (Exec] or [ENTER (YES)]:

Copy both the equalizer and level settings.

[F6 (EXIT] or [EXIT (NO)]:

Exit the window without copying.

5.When the data has been copied, the display will indicate “Complete.” Press [PLAY (DISPLAY)].

37

Image 36

Contents 01898978 ‘99-3-E3-11T Table of Contents Precautions Additional effect algorithms Automix editing functionalityEnhanced support for CD-R/CD-RW drives Enhanced operationsExpanding the functionality of the VS-1680 If you purchasedIf you purchased the V-XPANDED system program Zip disk Expanding the functionality of the VS-1680 Mix 16 tracks down to 2 tracks Mastering Room Added mastering tracksMixing down to the mastering tracks Cannot be usedStatus Trk L track L Trk R track RAfter Rec after recording MarkerSignal flow routing Mixdown shortcutPlaying back the mastering tracks Mixing down while inserting effects EFX1 effect insert switch Off RecSnd effect send level Rtn effect return levelHold down STOP, and press Status for all tracks New effects algorithms EQ EqualizerExpander Compressor Mixer BCut Bass-cut filter Enh EnhancerInput Exp ExpanderCmp Compressor Mix MixerLmt Limiter Out OutputModeling various speakers Speaker Modeling SpMod speaker modelingLFT/HFT Frequency trimmer Effective ways to use speaker modeling ReleaseEditing an automix Erasing data from a specific area EraseCopying data to another location Copy TargetSmooth data transitions Gradation Destination TargetDestination Mark Value Gradation CurveMarker Add Increasing or decreasing all data values Shift/Expand Press page so that F5 indicates A.Mix, and thenExpand ShiftThreshold Using the VS-1680 with a CD-R/CD-RW drive Song writing procedureSpecifying the writing speed Speed Finalize Write MethodCD Speed Backup procedure Specifying the speed of saving SpeedSource Song Recovery procedure +VerifyX2 353 KBps X1 176 KBps Erase All Songs Attention Enhancements related to operation Shortcut to the Phrase Edit windowCreating a new phrase Phrase New Sorting the take list SortDeleting a take Delete TakeTrack Naming a take Name 109014.e Dividing a phrase into two parts Phrase Split TypeMargin OUT ThresholdDivide Split To to point Linking the faders of two or more channels Fader Group GroupCopying mixer settings F4 Exec or Enter YESF6 Exit or Exit no Shift Lock on/off SHIFT+YES Removing direct current offset from the mix busDC Cut Enhancements to the display and specifications Checking inserted effects Icon and Patch Name displaySwitching the Song Select window List display Easy Routing Additional template MasteringSettings not stored in a scene Monitor Level Master Send switch display has been changed Pan→ MIXImmediate application of step-edited changes Symbols IndexInformation