3. Setting up ERGO and your Mixing Environment
Setting Up a 2.1 System with Two Full Range Monitors Setting Up a System with Two 2.1 Configurations (Figure 3.5) (Figure 3.4)
Figure 3.4
Configurations
There are several possible ERGO configurations. These all depend on how you want to use ERGO in the studio. What’s the same between all of these is that all of the configurations end with a pair of powered speakers (or an amp and speakers) connected to the “A” outputs on ERGO. What’s different are the various input options. These depend on your studio set up, for example;
•1 set of speakers, FireWire Audio Input
•2 sets of speakers, SPDIF, or Analog Input
•2 sets of full range speakers, FireWire Input
•2 sets of full ranges speakers, SPDIF, or Analog Input
•2.1 system, FireWire Audio Input
•2.1 system, SPDIF, or Analog Input
Figure 3.5
Setting Up a 2.2 System (Figure 3.6)
Figure 3.6
13