5. ERGO Calibration Software (ERGO Cal)
5.2.5Room Correction
The room correction score is a measure of how much processing is being performed in the room correction filters. To some extent, this reflects how audible the correction is. However, the same amount of processing can sound very different due to placement in frequency of the processing. For low values (below 10%) of the room correction index, only subtle correction is needed to the original sound in the room. With high room correction index values, more extensive processing is employed. The room correction score for a specific RoomPerfect™ filter can be viewed by pressing the Info button from the initial (ERGO is ready to measure your room) screen.
As ERGO begins taking measurements to acquire Room Knowledge, you will be notified of the percentage of information gathered after each measurement, and instructed to continue on to the next Room position measurement. (Figure 5.20)
Figure 5.20
Keep in mind that as long as Room Knowledge is 90% or greater, you are doing great! And, it can take you between 3 to 9 measurements before you get to 90%, so don’t be alarmed if it seems ERGO is asking for “too many” measurements. (Figure 5.21)
Figure 5.21
Once ERGO reaches 90% Room Knowledge, it will ask if you want to add more room measurements (Figure
Figure 5.22
23