8. Specific DAW Configurations
8.3Ableton Live™
If this is a new installation and ERGO is your only FireWire interface, set Ableton for ASIO mode by going into the Options menu in the toolbar and selecting Preferences.
When the screen
Figure 8.1
In Audio Device, select ERGO ASIO.
From here, you can choose sample rates, set the buffer sizes using the Hardware Setup button, and set the Input and Output Configs to your preference (stereo or mono channels).
8.4Nuendo®
Access the Device Setup window and select VST Audio System in the Devices list in the left pane of the screen. (Figure 8.2)
Figure 8.2
Select ERGO from the ASIO Driver menu. Then, select the ERGO driver from the Devices pane.
To open the control panel in Windows, click the Control Panel button. Using Mac OS X, access System Preferences from the Apple menu or from the Dock. If you’re using the Mac’s
If you do not see your specific DAW described, please refer to your DAW’s User’s Manual (especially the chapters related to Hardware/Software configuration, Audio Drivers’ selection, etc). You may also check www.krkergo.com for updates.
30