5. ERGO Calibration Software (ERGO Cal)
ERGO Cal is your friend. Get to know, and love it.
Double click ERGO Cal icon (located as shortcut in your desktop or within the Applications folder). Once you initialize ERGO Cal, the following screen appears (Figure 5).
5.1Set Up
Are you plugged in?
AfterEnter.you’ve plugged in your speakers and calibration mic, click (Figure 5.2)
Figure 5 | Figure 5.2 |
Then, ERGO is ready to measure your room (Figure 5.1)
Are you using ERGO in Speaker or Subwoofer Mode?
This screen asks if you’re going to use ERGO in Subwoofer mode (where you have a sub connected directly to ERGO). Well, are you? Choose YES or NO. If NO, go to Speaker mode. If YES, go to Subwoofer mode. (Figure 5.3)
Figure 5.1
All of the magic starts from here. ERGO is pretty good about | Figure 5.3 |
letting you know what it needs. It’ll tell you when to click Enter |
|
and when it needs something that it isn’t being given. All you |
|
have to do is pretty much follow the prompts that appear as you |
|
step through the program. So, now do what it says and click |
|
Enter. |
|
17