Programmed Playback
| 4 |
| 3 |
1 | 6 |
| 2 5 |
Up to 20 tracks from 3 discs can be programmed in the desired order.
Shuffle, Repeat and Intro check functions don’t work during programmed playback.
1Press the CD button or the FUNCTION button to select "CD".
2Press the PROGRAM button.
"TRACK", "MEMORY", and the current disc number blinks on the display.
<To cancel the program mode, press the STOP button.
<When no button is pressed for 10 seconds, the program mode will be cancelled.
3If you want to select another disc, press the corresponding button or the DISC SKIP button.
4Tap up or down the SKIP knob repeatedly to select a track.
5Press the PROGRAM button.
The track is programmed, and
<Repeat step 3 to 5 to program more tracks.
<You can program up to 20 tracks.
6When the selection of track numbers is completed, press the PLAY/PAUSE button to start program playback.
<If the PLAY/PAUSE button isn't pressed within 10 seconds, the MEMORY indicator will go off. In that case, press the PROGRAM button and then press the PLAY/PAUSE button to start program playback.
<When the playback of all the programmed tracks has finished, or if one of the following buttons is pressed, the MEMORY indicator will go off and the program mode will be cancelled:
STOP, FUNCTION (TAPE, AUX/PHONO, TUNER), POWER DISC SKIP, DISC 1,2,3
But the programmed contents aren't lost. You can return to the programmed playback by pressing the PROGRAM button and the PLAY button. (If another source was selected, press the CD button beforehand.)
18