Altinex MT109-102 manual Selt, Vloa, VLIxAm, Vlba, Vlta, LOD0

MULTI-TASKER™

Example:

An MT109-102is in slot #4. Adjust the BASS on the output by sending the command [SELBC4] and then using the [+] and [-] commands.

13.[SELT]

This command sets the path to adjust the treble level. The TREBLE level range is 00 to 16 and is adjustable using the [+] and [-] commands.

Command Format: [SELTCnUi]

Cn = Card ID (n = slot # from 1 to max slots)

Ui = Unit ID (i = # from 0 to 9)

Example:

An MT109-102is in slot #4. Adjust the TREBLE on the output by sending the command [SELTC4] and then using the [+] and [-] commands.

14.[VLOA]

This command sets the OUTPUT volume to an absolute value.

Command Format: [VLOAmCnUi]

m = Volume Level (m = # from 0 to 16)

Cn = Card ID (n = slot # from 1 to max slots)

Ui = Unit ID (i = # from 0 to 9)

Example:

Set the output volume to 16 for the MT109-102in slot #4. Send the command [VLOA16C4].

15.[VLIxAm]

This command sets an INPUT volume to an absolute level.

Command Format: [VLIxAmCnUi]

x= Input Number (x = # from 1 to 3) m = Volume Level (m = # from 0 to 16)

Cn = Card ID (n = slot # from 1 to max slots)

Ui = Unit ID (i = # from 0 to 9)

400-0343-003 12

Example:

Set Input 2 volume level to a value of 8 for the

card in slot #4. Send the command [VLI2A8C4].

16.[VLBA]

This command sets the output BASS level to an absolute level.

Command Format: [VLBAmCnUi]

m = BASS Level (m = # from 0 to 16)

Cn = Card ID (n = slot # from 1 to max slots)

Ui = Unit ID (i = # from 0 to 9)

Example:

Set the output BASS level of the MT109-102in slot #4 to the maximum of 16 by sending the command [VLBA16C4].

17.[VLTA]

This command sets the output TREBLE level to an absolute value.

Command Format: [VLTAmCnUi]

m = TREBLE (m = # from 0 to 16)

Cn = Card ID (n = slot # from 1 to max slots)

Ui = Unit ID (i = # from 0 to 9)

Example:

Set the output TREBLE of the MT109-102in slot #4 to a mid-range value of 8 by sending the command [VLTA8C4].

18.[LOD0]

This command disables the loudness feature.

Command Format: [LOD0CnUi]

Cn = Card ID (n = slot # from 1 to max slots)

Ui = Unit ID (i = # from 0 to 9)

Example:

Turn OFF the Loudness feature of the MT109-102in slot #4 by sending the command [LOD0C4].

12