3: SET RAMP TIME
CURRENT RAMP TIME: 18 SEC
1:04 SEC
2:06 SEC
3:08 SEC
4:10 SEC
5:12 SEC
6:14 SEC
7:16 SEC
8:18 SEC
ESC: GO BACK
KEY=
ESC: GO BACK
KEY=
3: STATUS
Equivalent to the [C] command. Returns the card status.
4: HELP
Equivalent to the [HELP] command.
Displays a list of commands available for the
ESC
Returns to the parent menu.
7.4.5 MENU MODE EXAMPLES
All MENU MODE examples assume an
NOTE When entering numeric values (not selecting menu items) the system may echo each character as it is typed. For example, entering a volume of 03 may appear as 0033 on the screen, depending on the settings of the control software.
1. Select THIS CARD for control
Follow the keystrokes below to select Input 3 as the source input.
Enter | List available cards |
01Select
1Select CONTROL Menu
1 | Select Card/Group Select |
0 | Select This Card (card #1) |
ESC | Return to CONTROL Menu |
ESC | Return to the MAIN Menu |
2.Set Input 3 Volume
Starting from the Main Menu, set Input 3 volume level to 16. Follow the keystrokes below.
2 Select SETUP Menu
2Select Set Input Volume
3Select Input 3 Volume
16Enter 16
NOTE The system may echo the 1 and the 6 entries, depending on the settings.
ESC | Return to SETUP |
ESC | Return to the MAIN Menu |
3.Set Output Volume
Starting from the Main Menu, set the output volume level to 16. Follow the keystrokes below.
1 Select CONTROL Menu
4 Select VOLUME
1 | Select OUTPUT volume |
111… | Press ‘1’ to increase volume level until |
| 16 is reached. |
ESC | Return to VOLUME Menu |
ESC | Return to CONTROL menu |
ESC | Return to the MAIN Menu |
23 |
23