8.3 SOUND DISTORTION
Cause 1: Source level is above 0.7Vp-p.
Solution1: Make sure that the source level is below 1V
Solution 2: Call ALTINEX at (714)
8.4 SOUND LEVEL IS LOW
Cause 1: Volume levels are inappropriate.
Solution 1: Turn up the source volume. If sound level is still low, see Solution 2.
Solution 2: Turn up the destination amplifier volume. If the sound level is still low, see Cause 2.
Cause 2: Poor signal transmission.
Solution: Check the cables for continuity and make sure that connections are wired properly to verify that there is good signal transmission. Note: Test the system by removing the card from between the source and the destination amplifier. If the problem persists, call ALTINEX at (714)
ALTINEX POLICY | 9 |
9.1 LIMITED WARRANTY/RETURN POLICY
Please see the Altinex website at www.altinex.com for details on warranty and return policy.
9.2CONTACT INFORMATION ALTINEX, INC
592 Apollo Street
Brea, CA 92821 USA
TEL: 714
TOLL FREE:
WEB: www.altinex.com
25 |
25