Altinex manual Menu Types, Main Menu, SUB Menus, 4 MT109-102 Menus

Page 22

MULTI-TASKER™

Example: 08 (Slot 8): MT109-102

NOTE: Only cards supporting the MENU feature will be displayed.

5. Find the alphanumeric characters representing the card whose setup requires changing. It will be the first one or two characters in the line.

6.Press the number or letter associated with the card, and a menu with options available for that card will appear on the screen. In the example above, press "08".

WARNING: Do NOT enter any characters except the one relating to the desired menu. Pressing ENTER or RETURN after "08" will force the system back to the original prompt.

7.After selecting the MT109-102as described above, the system will prompt for selections specific to that card.

8.Read each menu carefully, and continue selecting keys as prompted for further functions. (Example prompt: "Key= ")

7.4.3 MENU TYPES

1.MAIN MENU

The first menu displayed after selecting the card is the Main Menu. This menu provides access to the main functions related to the card. Press the key representing the menu item for access. A sub menu will appear next.

2.SUB MENUS

Each sub menu will display either another menu (sub menu) or a list of available options or settings. Press the key corresponding to the menu choice to change a setting or select the next menu.

NOTE: Pressing the ESCAPE (ESC) key in most menus will take you up to the previous menu.

7.4.4 MT109-102 MENUS

Following are the menus available to the MT109-102. The first menu is the Main Menu only. The second listing is an expansion of all the menu items available.

The expanded menu contains values that indicate the current setting or value of a parameter. The value is usually in parentheses, or otherwise indicated at the top of a sub menu. In some areas, additional comments are provided for clarification.

System prompts requiring specific values for volume, card number etc… are not shown. See the examples following the menus for details.

CAUTION: Pay special attention to the top of the CONTROL menu. After selecting the CONTROL menu, THIS CARD or a group will be identified at the top of the sub menu. Since group functions may be modified from this menu, make sure the desired card or group is selected.

MT109-102 MAIN MENU

PRESS KEY TO SELECT

1:CONTROL

2:SETUP

3:STATUS

4:HELP

ESC: GO BACK

KEY =

400-0343-003

21

21

Image 22
Contents MT109-102 Troubleshooting Guide General Precautions / Safety WarningsCleaning FCC / CE NoticeTechnical Specifications About Your MT109-102Description of MT109-102 Application Diagram Diagram 1 Typical SetupDiagram 2 Internal View SW5 Diagram 3 Switch Positions INPUT1 INPUT2 INPUT3 Line OutputSW1 OFF SW2 SW3 SW4 SW6Operation Installing Your MT109-102Description of Commands RS-232 ControlVER CnS?Ui ?CnUiSTA Selo SELImSelb VLIxAm SeltVloa VlbaCLR Volume Ramping FeatureLOD1 RUPRST RDNRDN=xx RampTest Card ID CommandsRamptime = 16 Seconds Memory is GoodSIDnCi RSISIDn SID+36. WR RSNHelp RMCClrg RMG39. RD CLMSelo STASeli SelbMenu Command Definitions Menu ModeUsing Menu Mode SUB Menus Menu TypesMain Menu 4 MT109-102 MenusSave VolumeMT109-102 Expanded Menus Control this Card ClearSet Output Volume Menu Mode ExamplesSet Input 3 Volume Select this Card for controlLED is not on Troubleshooting GuideNo Sound Sound Distortion Limited WARRANTY/RETURN PolicyAltinex Policy Sound Level is LOW