Example:
Group 5 of Unit ID 1 contains the cards in slots 1, 2 and 19. Read the member data for group 5 of Unit ID 1. Send the command [RDG5U1] and receive the following feedback:
G1=C1C2C19
Now, clear group 5 by sending the command [CLMG5U1]. Reread the member data as above and note the following feedback:
G1=EMPTY
7.3SUMMARY OF COMMANDS Card Commands
1) [VER] | Receives software version |
2)[C] Receives status of the card
3) | [CnS] | Save card settings |
4) | [?C] | Show card information |
5)[?] Show system cards
6) | [STA] | Enable/disable auto feedback |
7) | […S] | Save the command being sent |
8) | […F] | Show command feedback |
9) | [ + ] | Increments and Decrements |
| [ - ] | selected commands |
10) | [SELI] | Select input volume to adjust |
11) | [SELO] | Select output volume to adjust |
12) | [SELB] | Select to adjust bass level |
13) | [SELT] | Select to adjust treble level |
14) | [VLO] | Set absolute output volume |
15) | [VLIm] | Set absolute input volume |
16) | [VLB] | Set absolute bass level |
17) | [VLT] | Set absolute treble level |
18) | [LOD0] |
| Turn ON loudness feature |
19) | [LOD1] |
| Turn OFF loudness feature |
20) | [CLR] |
| Reset card to default values |
21) | [RUP] |
| Ramp volume UP to max (16) |
22) | [RUP=] |
| Ramp volume UP to a value |
23) | [RDN] |
| Ramp volume DOWN to min (1) |
24) | [RDN=] |
| Ramp volume DOWN to a value |
25) | [RST] |
| Stop ramping |
26) | [RAMP] |
| Display ramp rate |
27) | [RAMP=] | Set ramp rate | |
28) | [TEST] |
| Test internal memory IC's |
29) | [FBD] |
| Feedback delay on/off |
30) | [RSI] |
| Reset Card ID’s |
31) | [SIDn] |
| Set all Card ID’s |
32) | [SIDnCi] | Set one Card ID | |
33) | [SID+n] |
| Set Card ID offset |
34) | [RSN] |
| Read Card slot number |
35) | [HELP] |
| Display available commands |
Group Commands | |||
36) | [WR] | Groups multiple cards | |
37) | [RMC] | Remove members from group | |
38) | [RMG] | Delete group | |
39) | [RD] | Displays group members | |
40)[CLRG] Clears group members
41)[CLM] Delete group
19 |
19