Vax RS 232C manual

Page 24

Command	Controller	A-9000 Response
	Input sensitivity setting
Input ch1 Insense -24dB	ACH, 02H, 00H, 02H	ACH, 02H, 00H, 02H
	Speaker preset setting
Output ch2 SpPreset F-122	ADH, 02H, 01H, 01H	ADH, 02H, 01H, 01H
	Phantom power setting
Input ch3 Phantom ON	87H, 02H, 02H, 01H	87H, 02H, 02H, 01H
	Channel name recall
Input ch1 Name “INPUT1”	F0H, 03H, 40H, 00H, 00H	C0H, 09H, 00H, 00H,
		49H, 4EH, 50H,
		55H, 54H, 31H, 00H

Page 24 of 24

Image 24

Contents Series Mixer/Amplifiers RS-232C Protocol Manual Table of Contents Serial Port Setting SummaryCommand Configuration Transmission Data After Command ReceptionControl Command and Setting Value Channel Fader Gain Channel Fader Gain Position setting Channel Fader Gain Position V/S Gain Table6AH Channel Fader Gain Step Up/ Step Down Channel Fader Gain Step UP / Step Down Table Crosspoint Gain Crosspoint Gain Table Preset Memory Recall Power ON/OFF Channel ON/OFFTone Control Tone Control Gain Position Table EQ Settings EQ-GAIN TableEQ-Q Table EQ-FREQUENCY TableLoudness Compensation Settings Filter Settings High Pass Filter LOW Pass FilterInput Sensitivity Setting Phantom Power ON/OFF SettingInput Sensitivity Table Channel Name Request Table below shows Ascii codes used for NamesSpeaker Preset Table Speaker Preset SettingCommand List OFF/ONCommunication Examples