Vax RS 232C manual Tone Control Gain Position Table

Page 14

TONE CONTROL GAIN POSITION TABLE

Value		Gain (dB)	Value		Gain (dB)
HEX	DEC		HEX	DEC
00H	0	-12.0	0DH	13	+1.0
01H	1	-11.0	0EH	14	+2.0
02H	2	-10.0	0FH	15	+3.0
03H	3	-9.0	10H	16	+4.0
04H	4	-8.0	11H	17	+5.0
05H	5	-7.0	12H	18	+6.0
06H	6	-6.0	13H	19	+7.0
07H	7	-5.0	14H	20	+8.0
08H	8	-4.0	15H	21	+9.0
09H	9	-3.0	16H	22	+10.0
0AH	10	-2.0	17H	23	+11.0
0BH	11	-1.0	18H	24	+12.0
0CH	12	0
Value		Step Down	Value		Step Up
HEX	DEC		HEX	DEC
21H	33	-1.0 step	2DH	45	+1.0 step
22H	34	-2.0 step	2EH	46	+2.0 step
23H	35	-3.0 step	2FH	47	+3.0 step
24H	36	-4.0 step	30H	48	+4.0 step
25H	37	-5.0 step	31H	49	+5.0 step
26H	38	-6.0 step	32H	50	+6.0 step
27H	39	-7.0 step	33H	51	+7.0 step
28H	40	-8.0 step	34H	52	+8.0 step
29H	41	-9.0 step	35H	53	+9.0 step
2AH	42	-10.0 step	36H	54	+10.0 step
2BH	43	-11.0 step	37H	55	+11.0 step
2CH	44	-12.0 step	38H	56	+12.0 step

Note: 19H – 20H are deemed to be reserved.

Page 14 of 24

Image 14

Contents Series Mixer/Amplifiers RS-232C Protocol Manual Table of Contents Serial Port Setting SummaryControl Command and Setting Value Command ConfigurationTransmission Data After Command Reception Channel Fader Gain Channel Fader Gain Position setting Channel Fader Gain Position V/S Gain Table6AH Channel Fader Gain Step Up/ Step Down Channel Fader Gain Step UP / Step Down Table Crosspoint Gain Crosspoint Gain Table Preset Memory Recall Power ON/OFF Channel ON/OFFTone Control Tone Control Gain Position Table EQ Settings EQ-GAIN TableEQ-Q Table EQ-FREQUENCY TableLoudness Compensation Settings Filter Settings High Pass Filter LOW Pass FilterInput Sensitivity Table Input Sensitivity SettingPhantom Power ON/OFF Setting Channel Name Request Table below shows Ascii codes used for NamesSpeaker Preset Table Speaker Preset SettingCommand List OFF/ONCommunication Examples