Vax RS 232C manual Channel ON/OFF, Power ON/OFF

Page 12

5.4. Channel ON/OFF

This performs ON/OFF setting of the Input or Output channel. 9000Series Amplifier responds with the same data as that received.

92H, 03H, <Channel Attribute>, <Channel Number>, <ON/OFF>

<Channel Attribute>

00H: Input channel

01H: Output channel

<Channel Number>

00H - 07H (Input channel 1 - 8)

00H - 07H (Output channel 1 - 8)

<ON/OFF>

00H: Channel OFF

01H: Channel ON

Example 1: Setting the Input Channel 1 to ON

92H, 03H, 00H, 00H, 01H

Example 2: Setting the Input Channel 1 to OFF 92H, 03H, 00H, 00H, 00H

5.5. Power ON/OFF

This command performs ON/OFF setting of the power switch of the 9000 Series Amplifier. 9000Series Amplifier responds with the same data as that received.

F4H, 01H, <ON/OFF>

<ON/OFF>

00H: Power OFF

01H: Power ON

Example 1: Setting the power switch to OFF.

F4H, 01H, 00H

Example 2: Setting the power switch to ON.

F4H, 01H, 01H

Page 12 of 24

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Series Mixer/Amplifiers RS-232C Protocol Manual Table of Contents Serial Port Setting SummaryCommand Configuration Transmission Data After Command ReceptionControl Command and Setting Value Channel Fader Gain Channel Fader Gain Position setting Channel Fader Gain Position V/S Gain Table6AH Channel Fader Gain Step Up/ Step Down Channel Fader Gain Step UP / Step Down Table Crosspoint Gain Crosspoint Gain Table Preset Memory Recall Power ON/OFF Channel ON/OFFTone Control Tone Control Gain Position Table EQ Settings EQ-GAIN TableEQ-Q Table EQ-FREQUENCY TableLoudness Compensation Settings Filter Settings High Pass Filter LOW Pass FilterInput Sensitivity Setting Phantom Power ON/OFF SettingInput Sensitivity Table Channel Name Request Table below shows Ascii codes used for NamesSpeaker Preset Table Speaker Preset SettingCommand List OFF/ONCommunication Examples
Top Page Image Contents