Vax RS 232C manual Channel Fader Gain Step Up/ Step Down

Page 7

5.1.2 Channel Fader Gain - Step Up/ Step Down

Set the input and output channel gain positions by the number of steps.

Positions can be varied from the current status by the designated number of steps. One position varies per step.

9000Series Amplifier responds with the same data as that received.

The 9000series Amplifier informs position values changed by Step Up or Down. 93H, 03H, <Channel Attribute>, <Channel Number>, <Step>

<Channel Attribute> 00H: Input channel

01H: Output channel

<Channel Number>

00H - 07H (Input channel 1 – 8)

00H - 07H (Output channel 1 – 8)

<Step>

UP: 41H – 5FH (1 – 31 step up); Example showing 0.5dB Step Up: 41H

Down: 61H - 7FH (1 – 31 step down); Example showing 0.5dB Step Down: 61H

Example showing 0.5dB up of Input Channel 1 fader gain 93H, 03H, 00H, 00H, 41H

See Channel Fader Gain – Step Up / Step Down Table on the next page.

Page 7 of 24

Image 7
Contents Series Mixer/Amplifiers RS-232C Protocol Manual Table of Contents Summary Serial Port SettingTransmission Data After Command Reception Command ConfigurationControl Command and Setting Value Channel Fader Gain Position V/S Gain Table Channel Fader Gain Channel Fader Gain Position setting6AH Channel Fader Gain Step Up/ Step Down Channel Fader Gain Step UP / Step Down Table Crosspoint Gain Crosspoint Gain Table Preset Memory Recall Channel ON/OFF Power ON/OFFTone Control Tone Control Gain Position Table EQ-GAIN Table EQ SettingsEQ-FREQUENCY Table EQ-Q TableLoudness Compensation Settings High Pass Filter LOW Pass Filter Filter SettingsPhantom Power ON/OFF Setting Input Sensitivity SettingInput Sensitivity Table Table below shows Ascii codes used for Names Channel Name RequestSpeaker Preset Setting Speaker Preset TableOFF/ON Command ListCommunication Examples