8. COMMAND LIST
Function | Command Code |
Channel fader gain | 91H, 03H, <Channel Attribute>, <Channel Number>, |
| <Value> (position) |
| 93H, 03H, <Channel Attribute>, <Channel Number>, |
| <Value> (step) |
Crosspoint gain | 95H, 05H, <Source Channel Attribute>, <Source Channel |
| Number>, <Destination Channel Attribute>, <Destination |
| Channel Number>, <Value> |
|
|
Preset memory | F1H, 02H, 00H, <Preset Number> |
recall |
|
Channel | 92H, 03H, <Channel Attribute>, <Channel Number>, |
ON/OFF | <OFF/ON> |
Power ON/OFF | F4H, 01H, <ON/OFF> |
Tone control | AAH, 04H, <Channel Attribute>, <Channel Number>, |
(BASS/TREBLE) | <Bass/Treble>, <Value> |
EQ settings | A1H, 07H, <Channel Attribute>, <Channel Number>, |
- ON/OFF setting | <OFF/ON>,<Band Number>, <Gain Value>, <Q Value>, |
- Band No, setting | <Freq Value> |
- Gain setting |
|
- Q setting |
|
- Center frequency |
|
setting |
|
Loudness | ABH, 03H, <Channel Attribute>, <Channel Number>, |
compensation | <OFF/ON> |
Filter setting | A2H, 04H, <Channel Attribute>, <Channel Number>, |
- HPF setting | <HPF/LPF>, <Value> |
- LPF setting |
|
Input sensitivity | ACH, 02H, <Channel Number>, <Value>: (Input channel |
setting | only) |
Phantom power | 87H, 02H, <Channel Number>, <OFF/ON>: (Input channel |
setting | only) |
Channel name | F0H, 03H, 40H, <Channel Attribute>, <Channel Number> |
request | [Response code] |
| |
| C0H, 09H, <Channel Attribute>, <Channel Number>, |
| <ASCII Data(1byte)>, <ASCII Data(2byte)>, <ASCII |
| Data(3byte)>, |
| <ASCII Data(4byte)>, <ASCII Data(5byte)>, <ASCII |
| Data(6byte)>, |
| <ASCII Data(7byte)> |
Page 22 of 24