Vax RS 232C manual Loudness Compensation Settings

Page 17

5.8. Loudness Compensation Settings

Perform loudness compensation settings of the Input / Output channels. 9000Series Amplifier responds with the same data as that received.

Note: Command cannot be received during power off.

ABH, 03H, <Channel Attribute>, <Channel Number>, <OFF/ON>

<Channel Attribute>

00H: Input channel

01H: Output channel <Channel Number>

00H - 07H (Input channel 1 - 8)

00H - 07H (Output channel 1 - 8) <OFF/ON>

00H: Loudness OFF

01H: Loudness ON

Example: Setting the loudness compensation of Output Channel 2 to ON ABH, 03H, 01H, 01H, 01H

Page 17 of 24

Image 17

Contents Series Mixer/Amplifiers RS-232C Protocol Manual Table of Contents Summary Serial Port SettingControl Command and Setting Value Command ConfigurationTransmission Data After Command Reception Channel Fader Gain Position V/S Gain Table Channel Fader Gain Channel Fader Gain Position setting6AH Channel Fader Gain Step Up/ Step Down Channel Fader Gain Step UP / Step Down Table Crosspoint Gain Crosspoint Gain Table Preset Memory Recall Channel ON/OFF Power ON/OFFTone Control Tone Control Gain Position Table EQ-GAIN Table EQ SettingsEQ-FREQUENCY Table EQ-Q TableLoudness Compensation Settings High Pass Filter LOW Pass Filter Filter SettingsInput Sensitivity Table Input Sensitivity SettingPhantom Power ON/OFF Setting Table below shows Ascii codes used for Names Channel Name RequestSpeaker Preset Setting Speaker Preset TableOFF/ON Command ListCommunication Examples