Channels 7, Right Input, LEFT/MONO Input, Tape OUT

CHANNELS 7 - 8

NOTE: Channels 7 - 8 contain features that differ from the previous channels. Only those features are mentioned below.

36.

RIGHT INPUT:

1/4" input for line level signals. The

Right Input is not adjusted by the Gain

(27) control. The signal is then routed

to the internal power amp. If the

XR 800F is in Left/Right mode then

the signal will go to the Right Speaker

Output (4). In Mon/Main mode the

signal is combined with the Left and

placed on the Right/L+R Speaker

Output. The right signal can also be

patched out of the XR 800F via the

Right Output jack (8) to external

components such as effects, power

amps, and recording devices. This

feature is only found on Channels 7

and 8.

37. LEFT/MONO INPUT:

1/4" input for line level signals. The Left/Mono input supplies signal to both the Left and Right channels (if there is nothing inserted to the right input jack). It is not adjusted by the Gain Control (27). In Left/Right mode the signal will go to the Left Speaker Output (4) and Right Speaker Output if nothing is inserted to the right input jack. In Mon/Main mode the signal is combined with the Right and placed on the Right/L+R Speaker Output. This feature is only found on Channels 7 and 8.

CHANNEL 9

NOTE: Channel 9 contains features that differ from the previous channels. Only those features are mentioned below.

38.TAPE IN:

This stereo RCA phono jack accepts a stereo input (nominally -10 dBV) from the output of a tape deck or CD player and places it on the Left and Right channels as well as the Monitor and Effects Mix. See feature 31 on page 9.

39.TAPE OUT:

This stereo RCA phono jack provides a signal for the recording inputs of a stereo tape deck.

CAUTION! DO NOT HOOK THE TAPE IN AND TAPE OUT TO THE INPUT AND OUTPUT OF THE SAME DECK AT THE SAME TIME. DOING SO WILL FORM A LOOP CAUSING SEVERE FEEDBACK. USE SEPARATE DECKS FOR RECORDING AND PLAYBACK, OR USE THE INPUTS AND OUTPUTS OF THE SAME DECK AT SEPARATE TIMES.