C. Connect Output: Make a connection between Main Bus Output Terminals (3) and an input jack of an amplifier. Press Main Output Microphone/Line Switch (2) to appropri- ate position:“in” for
1 | 3 |
AUX OUT | MAIN |
On |
|
Off |
|
G - + | |
Phantom | 0dB |
2
If desired, also connect Auxiliary Bus Output Terminals (1) to a second destination device. The auxiliary output is
D. Connect mixer power supply to an AC power outlet and to the AC Power Jack (4) (located on far left side of rear panel).
E. Power up mixer:
Press Power Switch (8) to “in” position. [Power Indicator LED (7) will be lit if mixer is powered.] Set Main Output Volume Control Knob (5) to 2 o’clock. If auxiliary output is desired, also set Auxiliary Output Volume Control Knob (6) to 2 o’clock.
Power up amplifier.
Note: Mixer will produce signal transients on power up and power down. Always turn the mixer on first before turning on the amplifier and always turn the amplifier off first before turning off the mixer.
Page 12 of 32