© 2000 Bogen Communications, Inc.
All Rights Reserved.
Notice
Every effort was made to ensure that the information in this guide was complete and accurate at the time of printing. However, this information is subject to change.
Important Safety Information
Always follow these basic safety precautions when installing and using the unit:
1. Read all instructions before installing or operating the unit.
2.Follow all warnings and instructions marked on the product.
3.DO NOT block or cover the ventilation slots and openings.They prevent the product from overheating. DO NOT place the product in a separate enclosure or cabinet, unless proper ventilation is provided.
4.Never spill liquid on the product or drop objects into the ventilation slots and openings. Doing so may result in serious damage to the components.
5.Repair or service must be performed by a factory authorized repair facility.
6.The product is provided with a
7.DO NOT use the product near water or in a wet or damp place (such as a wet basement).
8.DO NOT use extension cords.The product must be installed within 6 feet of a grounded outlet receptacle.
9.DO NOT install telephone wiring during a lightning storm.
10. DO NOT install telephone jacks in a wet location unless the jack is specifically designed for wet locations.
11. Never touch uninsulated wires or terminals, unless the line has been disconnected at the paging or controller interface.
12. Use caution when installing or modifying paging or control lines.
Maintenance & Service
Caution
There are no
Our Applications Engineering Department is available to help you troubleshoot problems with your Bogen equipment. Engineers are available from 8:30 AM to 6:00 PM, Eastern Standard Time. Phone
Service can be obtained from our factory service department. No merchandise may be returned for repair without prior written authorization. Please contact our factory service department at
Domestic and International Listings
UL and CSA Listed.
Page 2 of 32