Bogen manual CAM8/CAM8PRO Rear Panel

1

4

6

7

8

18VCT

AC

AUX OUT

MAIN

AUX IN

Trim

8

Trim

7

Trim

6

Trim

5

Trim

4

Trim

3

Trim

2

Trim

1

Ground

On

Off

G - + Line

Line G - +

Line

Line G - +

Line G - +

Line G - +

Line G - +

Line G - +

Power

G - +

-50dB G - +

G - +

G - +

Phantom

0dB

Mic

Mic

Mic

Mic

Mic

Mic

Mic

Mic

2

3

5

9

10

CAM8/CAM8PRO Rear Panel

1. Ground Connection on Rear Panel

Access to ground.

2.AC Power Jack

Mixer power supply input. Accepts a 4-pin DIN connection from a 18V CT 1.5 Amp trans- former (uses approximately 500 mA).

3. Phantom Power Switch

When activated, supplies 30V DC power to all inputs set to mic level.

4.Auxiliary Bus Output

Balanced, line-level, connection to auxiliary output bus.

5. Main Output Microphone/Line Switch

Selects main output to be either MIC (-50 dBµ) or line (0 dBµ) level.

6. Main Bus Output

Balanced connection to main output bus.

7.Auxiliary Input

Balanced, buffered, uncontrolled, line-level terminals for additional (ninth) input connection directly to the summing buses selected by internal jumpers. The factory default is both jumpers installed. For details, see page 19.

8. Input Gain/Trim Control Screw

Adjusts gain of input stage, over a range of 40 dB.

9. Input Pad Microphone/Line Switch

Selects either MIC (-50 dBµ) or line (0 dBµ) level for corresponding input connection.

10. Input

Balanced input connection (pluggable terminal strip).

Page 9 of 32