Korg BX-3 manual Group 8 Program Name

Page 29

Parameters

Amp Gain Ctrl Min (Amp Gain Control Minimum) [0...99]

Specify the minimum setting of the Normal Edit mode and EX Edit mode Group 4 “Amp Gain” parameter. This will be the gain when the expression pedal etc. specified by the “Amp Gain Ctrl” parameter is in the minimum position.

Amp Gain Ctrl Max (Amp Gain Control Maximum) [0...99]

Specify the maximum setting of the Normal Edit mode and EX Edit mode Group 4 “Amp Gain” parameter. This will be the gain when the expression pedal etc. specified by the “Amp Gain Ctrl” parameter is in the maximum position.

Rev Mix Ctrl (Reverb Mix Controller)

[Off, Pedal 1/(Pdl 1)*, Pedal 2/(Pdl 2)*]

Pedal 1: An expression pedal etc. connected to the rear panel ASSIGNABLE PEDAL/SW 1 jack will control the Group 5 “Reverb Mix Level” parameter of Normal Edit mode and EX Edit mode.

Pedal 2: An expression pedal etc. connected to the rear panel ASSIGNABLE PEDAL/SW 2 jack will perform the above operation.

Off: No function.

Rev Mix Ctrl Min (Reverb Mix Control Minimum) [0...99]

Specify the minimum setting of the Normal Edit mode and EX Edit mode Group 5 “Reverb Mix” parameter. This will be the reverb mix level when the expression pedal etc. specified by the “Reverb Mix Ctrl” parameter is in the minimum position.

Rev Mix Ctrl Max (Reverb Mix Control Maximum) [0...99]

Specify the maximum setting of the Normal Edit mode and EX Edit mode Group 5 “Reverb Mix” parameter. This will be the reverb mix level when the expression pedal etc. specified by the “Reverb Mix Ctrl” parameter is in the maximum position.

Group 8: Program Name

Rename

Here you can modify the name. You can use up to twelve characters.

Use the [√ ][®] keys to select the character that you wish to change, and use the [–]/[+] keys to select the character. The following characters can be used.

* (Pdl 1), (Pdl 2): These indicate that Pedal 1 or Pedal 2 are selected for the Global mode Group 1 “Prog Up Ctrl” or “Prog Down Ctrl” parameters. With these settings, the settings of
Global mode are used, and the settings you made here will be ignored. However if you select another value in Global mode, the display here will change from (Pdl 1) to Pedal 1 or	29
from (Pdl 2) to Pedal 2, and you will be able to operate the corresponding function from the pedal switch.

Image 29

Contents Page CE mark for European Harmonized Standards FCC Regulation Warning for U.S.APrinting conventions in this manual How this manual is organized, and how to use itTable of Contents Normal mode Main featuresEX mode About the BXFront panel Parts of the BX-3 and what they doDisplay key EX Mode keyEdit key Global keyPitch Bend wheel, Modulation wheel Drawbar Select sectionPitch Bend wheel Modulation wheelRear panel Connections Power cable connectionsOutput jack connections Pedal connectionsPlaying using the Program’s drawbar settings Normal modeSelecting a program PlayingUsing the Drawbar 1 and 2 settings EX modeFrom Normal mode, press the EX Mode key Lets try selecting a programEX Percussion EX DrawbarsPlay the lower keyboard Selecting a different programNormal mode Switching the displayEX mode About the displayPercussion icon Global modeShortcuts About the programs Restoring the factory settingsHow a program is structured Initializing one programChecking the DB Presets Perc parameter Normal modePercussion Initializing the Global parametersEX Percussion in Drawbar EX modeRotary Saving your data EffectsEditing Use the + keys to select the desired settingMidi data dump Editing the soundOther parameters Editing the drawbar parametersCopying drawbar parameters Swapping two programs Copying a programEditing the name of a program Press the WRITE/ENTER key, and then press + key onceUse the -+ keys to specify the desired charac- ter Group 2 Drawbar Group 1 Basic CharacterGroup 3 Percussion Group 6 Rotary Effect Group 4 AmpGroup 5 Reverb Group 7 Controller Rtry Stop Pedal Rotary Stop Pedal Mode Momnt, Alter Wheel Brk Pedal Wheel Brake Pedal Mode Momnt, AlterRtry Fast Pedal Rotary Fast Pedal Mode Momnt, Alter Group 8 Program Name Group 1 Basic Global modeGroup 3 Midi Parameters Group 2 Midi ChannelGroup 4 Midi CC# Group 5 Midi CC# Group 7 Utility Group 6 Ex Drawbar SetExp Pdl Calibration Expression Pedal Calibration Group 8 DemoWheel Brake on Demo PlayAbout Midi Connecting an external Midi sequencer or computerHow the drawbars work Select the data that you want to dump TransmissionPress the Program 7 key, and then press the key twice Type of data Data size ReceptionTransmitting sound settings and other data Data Dump To reset all controllersChanging the program / bank To silence all notesEX mode programs Normal mode programsVoice name list Demo song namesTroubleshooting Cable storage Fortissimo functionSelectable pedal angle To select pedal angleSpecifications and options Assemblage du pupitre Assembling the standAttach the center brace Lightly attach the rear braces to the side panel RFixer légèrement les supports arrière au panneau latéral D Mettre le support central en placeOther cautions Check after assemblyVérification après montage Autres précautions à prendreMidi implementation chart