Korg BX-3 manual Fortissimo function, Cable storage, Selectable pedal angle, To select pedal angle

Page 42

Appendices

5.Operation of included Expression pedal

Fortissimo function

This allows you to selectively emphasise parts of your performance.

As shown in the diagram, the pedal angle is 30° when fully raised. The pedal will rest at any point you take your foot off from fully raised to standard position.

If you depress the pedal further from standard position, it will return to standard position when you take your foot off.

Also, by adjusting the screw on the bottom, you may adjust the spring return range from 0°–10°.

Cable storage

Store the cable as shown.

20°￿ Range of free ￿ movement

30°￿

Standard position

0–10°￿

Spring return range

Selectable pedal angle

As shown below, you may change the pedal angle to fit your plying position.

To select pedal angle

1.Loosen hook screw with a screwdriver.

2.Move the pedal body to the position in the illustra- tion.

3.Retighten the hook screw.

Standing performance

Seated performance

hook screw

hook screw

42

Image 42
Contents Page FCC Regulation Warning for U.S.A CE mark for European Harmonized StandardsHow this manual is organized, and how to use it Printing conventions in this manualTable of Contents EX mode Main featuresNormal mode About the BXParts of the BX-3 and what they do Front panelEdit key EX Mode keyDisplay key Global keyPitch Bend wheel Drawbar Select sectionPitch Bend wheel, Modulation wheel Modulation wheelRear panel Output jack connections Power cable connectionsConnections Pedal connectionsSelecting a program Normal modePlaying using the Program’s drawbar settings PlayingFrom Normal mode, press the EX Mode key EX modeUsing the Drawbar 1 and 2 settings Lets try selecting a programPlay the lower keyboard EX DrawbarsEX Percussion Selecting a different programEX mode Switching the displayNormal mode About the displayGlobal mode ShortcutsPercussion icon How a program is structured Restoring the factory settingsAbout the programs Initializing one programPercussion Normal modeChecking the DB Presets Perc parameter Initializing the Global parametersEX mode RotaryEX Percussion in Drawbar Effects Saving your dataMidi data dump Use the + keys to select the desired settingEditing Editing the soundEditing the drawbar parameters Copying drawbar parametersOther parameters Editing the name of a program Copying a programSwapping two programs Press the WRITE/ENTER key, and then press + key onceUse the -+ keys to specify the desired charac- ter Group 1 Basic Character Group 2 DrawbarGroup 3 Percussion Group 4 Amp Group 5 ReverbGroup 6 Rotary Effect Group 7 Controller Wheel Brk Pedal Wheel Brake Pedal Mode Momnt, Alter Rtry Fast Pedal Rotary Fast Pedal Mode Momnt, AlterRtry Stop Pedal Rotary Stop Pedal Mode Momnt, Alter Group 8 Program Name Global mode Group 1 BasicGroup 2 Midi Channel Group 3 Midi ParametersGroup 4 Midi CC# Group 5 Midi CC# Group 6 Ex Drawbar Set Group 7 UtilityWheel Brake on Group 8 DemoExp Pdl Calibration Expression Pedal Calibration Demo PlayConnecting an external Midi sequencer or computer How the drawbars workAbout Midi Transmission Press the Program 7 key, and then press the key twiceSelect the data that you want to dump Reception Type of data Data sizeChanging the program / bank To reset all controllersTransmitting sound settings and other data Data Dump To silence all notesVoice name list Normal mode programsEX mode programs Demo song namesTroubleshooting Selectable pedal angle Fortissimo functionCable storage To select pedal angleSpecifications and options Assembling the stand Assemblage du pupitreFixer légèrement les supports arrière au panneau latéral D Lightly attach the rear braces to the side panel RAttach the center brace Mettre le support central en placeVérification après montage Check after assemblyOther cautions Autres précautions à prendreMidi implementation chart