Korg BX-3 manual Group 4 Midi CC#

Page 32

Parameters

MIDI Rx C. Change (MIDI Receive Control Change) [Dis, Ena]

Dis (Disable): Incoming MIDI control changes will be ignored.

Ena (Enable): Incoming MIDI control changes will be received. (The factory setting is Ena.)

MIDI Tx C. Change (MIDI Transmit Control Change) [Dis, Ena]

Dis (Disable): MIDI control changes will not be transmit- ted.

Ena (Enable): MIDI control changes will be transmitted. (The factory setting is Ena.)

MIDI Local Cntrl (MIDI Local Control)

[Off, On]

Turns local control on/off. (The factory setting is On.) Off: The keyboard will be internally disconnected from the tone generator section. Select this setting when you want to use the keyboard and controllers of the BX-3 only to play a different tone generator.

Group 4: MIDI CC# 1

CC# Upper DB Sel (MIDI CC# Upper Drawbar Select) [1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the UPPER setting of the DRAWBAR SELECT section. (The factory setting is 79.)

CC# Lower DB Sel (MIDI CC# Lower Drawbar Select) [1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the LOWER setting of the DRAWBAR SELECT section. (The factory setting is 80.)

CC# Drawbar 1 16’ (MIDI CC# Drawbar 1–16’)

[1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 16' setting of Drawbar 1. (The factory setting is 16.)

CC# Drawbar 1 51/3’(MIDI CC# Drawbar 1–5-1/3’) [1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 5-1/3' setting of Drawbar 1. (The factory setting is 17.)

CC# Drawbar 1 8’(MIDI CC# Drawbar 1–8’)

[1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 8' setting of Drawbar 1. (The factory setting is 18.)

CC# Drawbar 1 4’(MIDI CC# Drawbar 1–4’)

[1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 4' setting of Drawbar 1. (The factory setting is 19.)

CC# Drawbar 1 22/3’(MIDI CC# Drawbar 1–2-2/3’) [1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 2-2/3' setting of Drawbar 1. (The factory setting is 20.)

CC# Drawbar 1 2’(MIDI CC# Drawbar 1–2’)

[1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 2' setting of Drawbar 1. (The factory setting is 21.)

CC# Drawbar 1 13/5’(MIDI CC# Drawbar 1–1-3/5’) [1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 1-3/5' setting of Drawbar 1. (The factory setting is 22.)

CC# Drawbar 1 11/3’(MIDI CC# Drawbar 1–1-1/3’) [1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 1-1/3' setting of Drawbar 1. (The factory setting is 23.)

CC# Drawbar 1 1’(MIDI CC# Drawbar 1–1’)

[1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 1' setting of Drawbar 1. (The factory setting is 24.)

CC# Drawbar 2 16’(MIDI CC# Drawbar 2–16’)

[1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 16' setting of Drawbar 2. (The factory setting is 70.)

CC# Drawbar 2 51/3’(MIDI CC# Drawbar 2–5-1/3’) [1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 5-1/3' setting of Drawbar 2. (The factory setting is 71.)

CC# Drawbar 2 8’(MIDI CC# Drawbar 2–8’)

[1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 8' setting of Drawbar 2. (The factory setting is 72.)

CC# Drawbar 2 4’(MIDI CC# Drawbar 2–4’)

[1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 4' setting of Drawbar 2. (The factory setting is 73.)

CC# Drawbar 2 22/3’(MIDI CC# Drawbar 2–2-2/3’) [1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 2-2/3' setting of Drawbar 2. (The factory setting is 74.)

CC# Drawbar 2 2’(MIDI CC# Drawbar 2–2’)

[1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 2' setting of Drawbar 2. (The factory setting is 75.)

CC# Drawbar 2 13/5’(MIDI CC# Drawbar 2–1-3/5’) [1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 1-3/5' setting of Drawbar 2. (The factory setting is 76.)

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Page FCC Regulation Warning for U.S.A CE mark for European Harmonized StandardsHow this manual is organized, and how to use it Printing conventions in this manualTable of Contents Main features Normal modeEX mode About the BXParts of the BX-3 and what they do Front panelEX Mode key Display keyEdit key Global keyDrawbar Select section Pitch Bend wheel, Modulation wheelPitch Bend wheel Modulation wheelRear panel Power cable connections ConnectionsOutput jack connections Pedal connectionsNormal mode Playing using the Program’s drawbar settingsSelecting a program PlayingEX mode Using the Drawbar 1 and 2 settingsFrom Normal mode, press the EX Mode key Lets try selecting a programEX Drawbars EX PercussionPlay the lower keyboard Selecting a different programSwitching the display Normal modeEX mode About the displayPercussion icon Global modeShortcuts Restoring the factory settings About the programsHow a program is structured Initializing one programNormal mode Checking the DB Presets Perc parameterPercussion Initializing the Global parametersEX Percussion in Drawbar EX modeRotary Effects Saving your dataUse the + keys to select the desired setting EditingMidi data dump Editing the soundOther parameters Editing the drawbar parametersCopying drawbar parameters Copying a program Swapping two programsEditing the name of a program Press the WRITE/ENTER key, and then press + key onceUse the -+ keys to specify the desired charac- ter Group 1 Basic Character Group 2 DrawbarGroup 3 Percussion Group 6 Rotary Effect Group 4 AmpGroup 5 Reverb Group 7 Controller Rtry Stop Pedal Rotary Stop Pedal Mode Momnt, Alter Wheel Brk Pedal Wheel Brake Pedal Mode Momnt, AlterRtry Fast Pedal Rotary Fast Pedal Mode Momnt, Alter Group 8 Program Name Global mode Group 1 BasicGroup 2 Midi Channel Group 3 Midi ParametersGroup 4 Midi CC# Group 5 Midi CC# Group 6 Ex Drawbar Set Group 7 UtilityGroup 8 Demo Exp Pdl Calibration Expression Pedal CalibrationWheel Brake on Demo PlayAbout Midi Connecting an external Midi sequencer or computerHow the drawbars work Select the data that you want to dump TransmissionPress the Program 7 key, and then press the key twice Reception Type of data Data sizeTo reset all controllers Transmitting sound settings and other data Data DumpChanging the program / bank To silence all notesNormal mode programs EX mode programsVoice name list Demo song namesTroubleshooting Fortissimo function Cable storageSelectable pedal angle To select pedal angleSpecifications and options Assembling the stand Assemblage du pupitreLightly attach the rear braces to the side panel R Attach the center braceFixer légèrement les supports arrière au panneau latéral D Mettre le support central en placeCheck after assembly Other cautionsVérification après montage Autres précautions à prendreMidi implementation chart
Top Page Image Contents