Korg BX-3 manual Group 8 Demo, Exp Pdl Calibration Expression Pedal Calibration, Wheel Brake on

Parameters

3 . Usk+h[et]-[yostehetlctpowero-nsetiorgf theupperDRAWBARSELECTsection.

PRESET: When the power is turned on, the [Preset

Drawbar] key will be recalled.

1:When the power is turned on, the [Drawbar 1] key will be recalled.

2:When the power is turned on, the [Drawbar 2] key will be recalled.

4 . Tospecifyhetpowero-ngseihetowerfrl DRAW-

BARSELECTsection,pressthe[®]key.

5 . Usk+h[et]-[yostehetlctpowero-nsetiorgf thelowerDRAWBARSELECTsection.

6 . Pressthe[WRITE/ENTER]key.

When the settings have been registered, the display will indicate DfltDB Set Completed, and will then indicate Default DB Select.

Exp Pdl Calibration (Expression Pedal Calibration)

If operating the expression pedal connected to the rear panel EXPRESSION PEDAL jack does not produce the appropriate result, use the following procedure to adjust the sensitivity of the expression pedal.

1 .Concthetxpanehrostirtdalel

EXPRESSION PEDAL jack.

2.prasmthitSlce.r

3. Pressthe[WRITE/ENTER]key.

The display will indicate Set ExpPdl Min Pos.

4 . Movhetxprehotsmpdaleniitumon,positi andpressthe[WRITE/ENTER]key.

The display will indicate Set ExpPdl Max Pos.

5 . Movhetxpreonshpdlmteiotamumxion,positi andpressthe[WRITE/ENTER]key.

Wheel Brake ON

This simulates the way in which the tone wheel rotation slows down when the power of a tone wheel organ is switched on/off.

When you press the [WRITE/ENTER] key, the tone wheel rotation will gradually slow down and stop. At this time, the pitch will also fall. Press the [WRITE/ENTER] key once again, and tone wheel rotation will gradually resume.

Group 8: DEMO

DEMO Play [1...9]

Here you can select and play back the demo songs. For details, refer to “1. Listening to the demo songs” (p.11).

35