Stovax PR0696 manual Logic Hotbox & Convector Fire

Page 1

Logic Hotbox & Convector Fire

With upgradable control valve

Instructions for Use, Installation and

Servicing

For use in GB, IE (Great Britain and Eire)

This appliance has been certified for use in countries other than those stated. To install this appliance in these countries, it is essential to obtain the

translated instructions and in some cases the appliance will require modification. Contact Gazco for further information.

IMPORTANT

The chimney must be swept before installation. Do not attempt to burn rubbish on this fire. This fire has a naked flame.

A suitable guard should be used for the protection of young children, the elderly or infirm.

This appliance is intended for decorative purposes only.

Please read these instructions carefully and keep them in a safe place.

They will be needed when servicing the fire.

The commissioning sheet on page 3 must be completed by the Installer.

PR0696 Issue 3 (January 2008)

Image 1
Contents Logic Hotbox & Convector Fire Contents FLUE CHECK APPLIANCE COMMISSIONING CHECKLISTGAS CHECK Lighting the Fire User InstructionsTurning the Fire OFF Lighting the Fire with a MatchArrangement of Fuel BED Components Cleaning the FireCoal Layout Front ROW Coal Layout Using Flat Fire Fronts Oxygen Depletion Sensor Installation DetailsFlame Failure Device 10. ‘RUNNING IN’Technical Specification Installation InstructionsMinimum Debris Collection Flue and Chimney Requirements Site RequirementsAppliance Location GAS Supply Installation Cable Retention Method Installation of the ApplianceScrew Fixing Method AR1163 AR1160 AR1174 AR1171 Commissioning Installation / CommissioningServicing Servicing InstructionsServicing Requirements Servicing Instructions Fault Finding Charts Fault Finding Charts General Replacing PartsIgnition Lead Gas valve Mag unit 9th Service 10th Service Service Records