INSTALLATION INSTRUCTIONS
INSTALLATION
two small coals. These coals should touch the rear panel. See diagram 17.
17
AR1168
7.10Finally place five large coals between the second and rear row of coals. See diagram 18.
18
AR1169
7.11It is essential that gaps are left between the coals to maximise the performance of the appliance.
PEBBLE LAYOUT - CURVED AND FLAT FRONTS
7.12ALL THE PEBBLES HAVE AN ID NUMBER ON THE UNDERSIDE. ENSURE THE PEBBLES ARE PLACED ONLY IN THEIR CORRECT POSITIONS.
7.13Place the first row of pebbles on top of the front coal resting against the frame front. All the numbers must be placed face down so they cannot be seen. See diagram 19.
19
orientation of each pebble, as this is important to the performance of the fire. See diagram 20.
20
AR1172
7.15Place the rear row of pebbles on top of the flame baffle, these must touch the rear panel. See diagram 21.
21
AR1173
7.16Place the remaining five pebbles between the second and rear rows. See diagram 22
22
6 5 4 5 2
AR1174
AR1171
7.14Working from the outer edges, place the second
row of pebbles against the rear of the first row. Note the
16