USER INSTRUCTIONS
COAL LAYOUT
NOTE: THERE ARE TWO LARGE COALS IN A SEPARATE BAG INSIDE THE MAIN BAG FOR USE WITH A CURVED FRONT (SUCH AS THE HOLYROOD AND RICHMOND) AND NOT FOR A FLAT FRONTED FRAME.
A)FRONT ROW COAL LAYOUT USING FLAT FIRE FRONTS
7.6This first row marks the only difference in coal layout between the flat fronts and curved fronts. Place one large coal centrally on the front coal resting against the frame. Then place three small coals either side.
See diagram 8.
8
AR1166
B)FRONT ROW COAL LAYOUT USING CURVED FIRE FRONTS
7.7Place three large coals resting on top of the front coal and against the front of the frame, then place two small coals either side of the large ones. See diagram 9
9
AR1165
C)COAL LAYOUT CONTINUED FROM FRONT ROW
7.8Place four large coals behind the first row and one small coal either end resting up against the side panels.
See diagram 10
10
AR1167
7.9Place one small coal either side on top of the flame baffle in each rear corner. Then place two large coals in between the two small coals. These coals should touch the rear panel.
See diagram 11.
11
AR1168
7.10Finally place five large coals between the second and rear row of coals. See diagram 12.
12
AR1169
7.11It is essential that gaps are left between the coals to maximise the performance of the appliance.
PEBBLE LAYOUT - CURVED AND FLAT FRONTS
7.12ALL THE PEBBLES HAVE AN ID NUMBERS ON THE UNDERSIDE. ENSURE THE PEBBLES ARE PLACED ONLY IN THEIR CORRECT POSITIONS.
7.13Place the first row of pebbles on top of the front coal resting against the frame front. All the numbers must be placed face down so they cannot be seen. See diagram 13.
6