Installation Instructions
Cabinet Installation
warning
To avoid an explosion hazard, do not connect the cart or appliance(s) to electrical power until after the gas supply system has been checked for leaks.
important
To prevent damage to the gas regulator, install the regulator only after the appliance is mounted in its permanent position in the enclosure.
•With at least one person on each side of the unit, lift it up and lower it into the cabinet cutout. As you lower it into the cutout slide the electrical cord into the utility cutout.
OBSB162 | OB36 or |
| OBS36 |
Insert power cord into utility cutout
OB52 or
OBS52
Insert power cord into utility cutout
Cart Installation
warning
•Attach the appliance to the cart with all of the supplied bolts before use.
•All gas and electrical connections should be made after the grill is installed and bolted to the cart.
•To avoid an explosion hazard, do not connect the cart or appliance(s) to electrical power until after the gas supply system has been checked for leaks.
important
To prevent damage to the gas regulator, install the regulator only after the appliance is mounted in its permanent position on the cart.
1.Remove the cart from the shipping pallet before instal- lation. The Dacor cart ships assembled ready for installation of the outdoor grill. Set the cart in an open location and lock the wheels on the cart to minimize movement.
2.Remove the drawers.
3.With at least one person on each side, lift the appliance up and lower it onto the cart. As you lower it onto the cart slide the electrical cord into the utility
36-Inch Cart Shown
Insert power cord into utility cutout
Utility cutout
Locking |
| Rotating wheel |
|
| |
wheel | Tank shelf | Locking wheel |
|
|
4.Center the unit on the cart, making sure to line up the threaded mounting holes under the bottom of the grill with the holes in the top of the cart.
5.Thread all of the supplied bolts into the bottom of the outdoor grill from inside the cart. Tighten the bolts into place.
12