Optimus 745 owner manual Selecting a CD, Removing CDS

13-1293.fm Page 26 Wednesday, July 14, 1999 6:49 PM

After the CD changer checks all disc trays, the display shows each loaded CD’s disc number at the bottom of the display surrounded by a graphic.

To assign a category or subcategory to a CD (see “Assigning Category and Subcategory Names to Loaded CDs” on Page 31).

SELECTING A CD

With play stopped, select the CD you want to play or eject one of two ways.

•Repeatedly press DISC SKIP DOWN or UP on the CD changer (or DISC SELECT – or + on the remote control) until the disc num- ber appears.

•Press the appropriate DISC SELECT key(s) on the CD changer until the disc number appears.

For example, to select disc num- ber 23, press 2/DEF, then 3/GHI. (Precede single-digit numbers with a 0. For example, to select disc number 3, press 0-/*, then 3/ GHI.)

26

Note: If you select a number that does not have a CD assigned to it, NO DISC appears on the display.

REMOVING CDS

1.With play stopped, select the CD you want to eject.

2.Press DOOR OPEN. The CD changer’s door opens.

3.Press LOAD/UNLOAD inside the CD changer’s door. CHANGE appears on the display, the plat- form moves the selected CD to the slot and the graphic around the selected CD’s number disap- pears.

4.After the platform stops, gently remove the CD from the CD slot.

5.To remove more CDs, select the CD then repeat Steps 3–4.

6.Close the door.