Optimus 745 owner manual Preparation, Unpacking System, Placing Speakers

Page 8

13-1293.fm Page 8 Wednesday, July 14, 1999 6:49 PM

PREPARATION

Cautions:

Do not connect the system to AC power until you complete all other connections.

Be sure to follow all the instruc- tions in the enclosed “Safety Instructions” sheet.

UNPACKING THE

SYSTEM

The protective cardboard sheet in the system’s CD compartment helps pro- tect the system from damage during shipment or while moving it. To re- move the cardboard sheet, first re- move all packing material from around the system, then press DOOR OPEN. When the CD changer’s door opens, remove the cardboard sheet, then close the door.

Note: Save the cardboard sheet in case you ever want to move the sys- tem to another area. Before you move the system, be sure there are no CDs in the CD changer, then re-insert the cardboard sheet into the CD chang- er’s center slot.

The system speakers’ features and specifications are packed with the speakers.

PLACING THE

SPEAKERS

The System 745 includes one center, two front, and two rear (surround) speakers. Before you connect them, follow these steps to place the speak- ers.

Front

Center Speaker

Front

 

 

 

 

 

 

 

 

Speaker

 

 

 

 

 

 

 

 

Speaker

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rear Speakers

1.Place the center speaker directly in front of the listening area, above or below the TV.

Note: The center speaker is mag- netically shielded to prevent video distortion. However, if the TV pic- ture has interference, increase the distance between the TV and the speaker, but keep the speaker in line with the TV.

8

Image 8
Contents System Stereo Rack System Fm Page 2 Wednesday, July 14, 1999 649 PM Features Stereo TunerDual Cassette Deck FCC Wants YOU To Know Contents Repeat Play Random Play Placing Speakers PreparationUnpacking System Connecting Speakers Surround Speakers Front SpeakersCenter Speaker Connecting Antennas Connecting an FM AntennaConnecting Other Audio Sources Connecting the AM Loop AntennaConnecting a Turntable Connecting Video EquipmentConnecting Headphones Putting Batteries in the Remote ControlListening Safely Connecting PowerResetting System Operation Basic OperationUsing the Remote Control Dolby Surround Encoded Material Selecting the Dolby Surround ModeDolby PRO Logic Surround Press Test Tone to turn off the test tone Adjusting the Sound Using the Tuner Manual Tuning Seek TuningMemory Tuning Automatically Storing StationsSelecting Preset Stations Manually Storing StationsChanging the Tuning Increment Using the CD Changer Loading CDSFm Page 25 Wednesday, July 14, 1999 649 PM Selecting a CD Removing CDSPlaying CDS AgainSkipping Tracks Audible SearchRepeat Play Random PlayIntro Scan Assigning Preset Category Names Assigning Category and Subcategory Names to Loaded CDSCreating and Assigning New Category Names Creating and Assigning Subcategory Names Changing/Erasing Category and Subcategory Names Category/Subcategory Play Sequence Programmed PlayProgramming and Playing a Changing a Programmed Sequence Reviewing the Programmed SequenceAdding Selections to the Programmed Sequence CD Care Tips Clearing the Programmed SequenceUsing the Cassette Deck Loading a Cassette TapePlaying a Cassette Tape Using Consecutive Play Deck 2 to Deck Using Dolby Noise ReductionRecording Dubbing Copying Cassette TapesDubbing Copying CDs Recording from the Tuner or an Audio Source Tape Tips Storing CassettesPreventing Accidental Erasure Erasing a Cassette TapeTroubleshooting Disc Error scrollsRepeatedly press FM Care and Maintenance Cleaning the TAPE- Handling Parts Amplifier SpecificationsGeneral Dual Cassette Deck Infrared Remote ControlCD Changer RadioShack