Recording from the Tuner or an Audio Source
You can record from the tuner or from an external audio source connected to the System 745, such as a turntable, a VCR, or video equipment.
1.Load a blank cassette tape, or one you want to record over, into Deck 1.
2.Press PLAY on Deck 1, wait for the blank tape to play past the tape leader (about 8 seconds), then press STOP/EJECT on Deck 1.
3.Press TUNER, PHONO, or VIDEO to select the audio source you want to record from.
4.On Deck 1, press PAUSE then
RECORD. RECORD and PLAY on Deck 1 automatically lock down.
Caution: Do not force down RECORD. This can damage the recording mechanism.
5.Simultaneously press PAUSE on Deck 1 and start the selected audio source (if necessary). The cassette records until it reaches the end of the side, then it auto- matically stops.
Note: To pause recording, press PAUSE on Deck 1. To resume recording, press PAUSE again.
44
6.To completely stop recording before it automatically stops, stop the selected audio source (if nec- essary), then press STOP/EJECT on Deck 1. Press STOP/EJECT again to open the cassette com- partment and remove the cassette tape.
Note: When you play back a cassette tape on which you recorded an AM ra- dio program, you might hear a high- pitched tone or whistling sound. This is called a beat. To reduce the beat while playing a tape, set HIGH SPEED
DUBBING/BEAT CANCEL on the tape deck to NORMAL/1 or HIGH/2 and
leave the switch on the setting that gives the best recording quality.