Optimus 745 owner manual Using Consecutive Play Deck 2 to Deck, Using Dolby Noise Reduction

13-1293.fm Page 41 Wednesday, July 14, 1999 6:49 PM

The DIRECTION indicator shows the playback tape direction —

DIRECTION (normal play- back) or DIRECTION (reverse playback).

Caution: When the tape in Deck 2 reaches the end during fast- forward or rewind, press STOP/ EJECT to release the mecha- nism.

Note: Deck 1 has a full-release auto stop system to protect the tape and prevent pinch roller dam- age. When the tape reaches the end during playback, recording, fast-forward, or rewind, the tape mechanism in Deck 1 automati- cally releases.

4.Press STOP/EJECT to stop play- back at any time.

USING CONSECUTIVE PLAY (DECK 2 TO DECK 1)

You can set the tape player to play both sides of the tape in Deck 2, then automatically play one side of the tape in Deck 1.

1.Press in REV MODE on Deck 2.

2.Press PLAY on Deck 2. The cas- sette in Deck 2 plays.

3.While the cassette in Deck 2 is playing, press PAUSE then PLAY on Deck 1.

When the cassette in Deck 2 finishes playing both sides, the cassette tape in Deck 1 automatically begins play- back.

USING DOLBY NOISE REDUCTION

The System 745’s cassette Deck uses the Dolby-B NR (noise reduction) sys- tem which lowers the level of back- ground noise or “tape hiss” to one third of the original level.

When listening to a recording, set DOLBY NR ON/OFF to the setting used when it was recorded.

41