Fire Pit Burner Installation
The log set and crushed lava rock are shipped together on applicable models. Remove the log set and
Turn the fire pit on its side. Connect the piezoelectric starter and attach the flex hose for the gas supply.
Place the fire pit back down on its pedestal. Attach the gas flex hose to the burner.
Note: If you want to convert the orifice from LP to NG, this is location of the orifice. See next page for gas converstion instructions.
2009 Fireplaces and Firepits
13
Installation / Assembly
LTR20091006, Rev. B | www.calspas.com |