Connection
Inspect the hose shipped with the unit for damage. Never attempt to use damaged or plugged equipment. See your local LP gas dealer for repairs. After inspecting the LP hose shipped with the unit, connect the end with the female fitting on the hose to the male fitting on the on/off gas valve at the end of the hose. Tighten fittings using two wrenches.
When connecting the regulator assembly to the tank valve, hand tight- en the black
Purge the gas supply line of any trapped air prior to the first firing of the unit.
During the initial purging and subsequent lightings, NEVER allow gas to remain in the “Open” position without first placing and igniting the fire starter.
Locate the hose out of the pathways where people may trip over it or in areas where the hose may be subjected to accidental damage.
2009 Fireplaces and Firepits
9
Installation / Assembly
LTR20091006, Rev. B | www.calspas.com |