Aussie 68R5A9SSS1 manual Control Knob

22

Lighting the Grill Using the Pulse-Spark Ignitor (continued)

!WARNING

To reduce the risk of serious bodily injury or death from fire or explosion:

•Open Hood before lighting the grill to prevent an explosion from gas build-up.

•During failed lighting attempts, or if the Burners go out during operation, turn Control Knobs “Off” to dissipate any accumulation of gas. Wait five minutes before repeating lighting procedure.

•Light each burner from the left before lighting the next burning to prevent gas from accumulating.

1.Open the Hood.

2.IMPORTANT: Make sure Control Knobs are turned “Off.” (Fig. 7)

3.Turn the LP Gas Cylinder valve open counterclockwise until it stops. (Fig. 8)

Control Knob in	Control Knob in High
	position (large flame
Off position	symbol)
		Turn LP Gas
	Fig. 8	Cylinder valve
		counterclockwise
Fig. 7

4.Push far left Main Burner Control Knob in on Control Panel and turn counterclockwise to the High position. (Figs. 7 and 9)

Left Main Burner

Control Knob

Fig. 9

Igniter Button

Right Main Burner Control Knob