Aussie 68R5A9SSS1 manual How to Clean the Burners

Page 32

32

Cleaning the Grill (continued)

In order to prevent flashbacks, the Burner(s) should be removed from the grill and cleaned periodically, especially if the grill has been stored for an extended period of time.

 

 

Valve

 

Control Knob

Burner

 

 

 

 

Spider webs or nest

Fig. 15

 

inside Venturi Tube

 

 

Venturi Tube

How to Clean the Burners

1.Make sure the Control Knobs are turned “Off” and the grill is completely cooled.

2.Carefully remove Cooking Grids and Flavor Activators.

3.To remove each Main Burner, first remove the nut & bolt that fastens the burner flange to back wall. (Fig. 16) Leave Side Burner in place.

4.Slide each Main Burner toward the grill front to disengage tab at rear of burner from slot in back wall of bowl. Gently lift the rear of the Burner. (Fig. 17) Slide the Burner towards the grill back to move the Venturi Hole off of the Valve nozzle. (Fig. 18) Lift each Main Burner from the grill.

Remove nuts and bolts.

Fig. 16

Fig. 17

Lift Burner up and out.

View from inside front body

Valve nozzle

Fig. 18

Burner Venturi Hole fits centrally around Valve nozzle.

Image 32
Contents LP Gas Grill Assembly and Use Manual 68R5A9SSS1Tools Required for Assembly Supplied with Grill Carbon Monoxide HazardPacking List DescriptionContents Preparation for AssemblyStep Cabinet Bottom Assembly Assembly InstructionsStep Caster Assembly Step Side Panel Assembly Front Corner Bracket Assembly Step Front Crossbar AssemblyStep Cabinet Upright Assembly Step Door Handle Assembly Step Back Panel Brace wire AssemblyCylinder Blocking Wire Assembly Step Drawer Assembly Drawer PositioningStep Door Assembly Step Hood/Body To Cart AssemblyStep Side Table Assembly Step Side Burner Valve Assembly Step Side Burner Igniter Wire ConnectionStep Side Burner Control Knob Assembly Side Burner Grid AssemblyStep Bottom Body Panel Assembly Foil Pan/Grease Pan AssemblyStep Warming Rack Assembly Step Flavor Activator/Cooking Grid AssemblyStep Battery in Igniter Installation StorageLP Gas Cylinder Connecting/Disconnecting the GasUsing Gas LP Hose and Regulator Connecting LP Gas CylinderDisconnecting LP Gas Cylinder Before Using Your LP Gas Grill Installation CodesSelecting a Location Performing a Leak TestHow to Perform a Leak Test First Time USE and as required Replace the control panel in the same Lighting the Grill Using the Pulse-Spark Ignitor Control Knob Lighting the Rotisserie Burner Manually Lighting the Grill Manually Lighting the Side Burner Lighting the Side BurnerCheck The Flame Manually Lighting the Side Burner Manually Lighting the Rotisserie BurnerCooking On the Gas Grill Grill Cooking Direct MethodIndirect Cooking Roasting Roasting Indirect MethodDirect Cooking on the Grids Rotisserie Cooking Rotisserie CookingPoultry Leg of LambWarming Rack End of Cooking SessionCare and Maintenance Cleaning the GrillHow to Clean the Burners Open up Troubleshooting EmergenciesSee How to Clean Burners in Care and Maintenance Clean the Burners. See How to Clean Burners in CareMaintenance Then stops when full Rises up while fillingPage Parts List- Model Key Description QuantityParts Illustrations- Model Limited Warranty Meco Corporation