15
Step 19
Battery in Igniter Installation
Unscrew Igniter Cover and insert AA Battery with the negative
Battery
AA1.5v Alkaline
1 pc
Storage
-
+
This Completes the Grill Assembly.
!WARNING
To reduce the risk of serious bodily injury or death:
•Store your LP gas grill in a cool dry place. Do not store an LP Gas Cylinder in a space greater than 125 degrees Fahrenheit. Never store a connected LP Gas Cylinder in a building, garage, or any enclosed area.
•Store LP Gas Cylinders outdoors out of reach of children.
•Never store an LP Gas Cylinder indoors (empty or filled) unless it is disconnected from the gas grill and the cylinder’s Gas Supply is turned “OFF.”
•Never leave an LP Gas Cylinder inside a vehicle that can become overheated by the sun.
•Even though your LP Gas Cylinder may appear to be empty, gas may still be present and the LP Gas Cylinder should be transported and stored accordingly.
•Never store a spare LP Gas Cylinder under or near the LP gas grill.
•Always turn off the LP Gas Cylinder at the LP Gas Cylinder valve when the gas grill is not in use.
1.Disconnect LP Gas Cylinder from grill and store outside, in a dry,
2.Remove Burners and wrap with aluminum foil to prevent insects from entering the Burner holes. Store wrapped Burners on top of Cooking Grid.
3.You may wrap the Cooking Grid and Flavor Activators in aluminum foil and place inside the Hood or store inside your dwelling.
4.Place a grill cover over the grill and store outdoors if possible. It may be stored indoors only if the LP Gas Cylinder is disconnected from the gas grill and stored outside.
5.Before next use, remove aluminum foil and reinstall Burners, Flavor Activators, and Cooking Grids.
6.Before using the grill after periods of storage or
7.Periodically check and tighten all nuts, bolts, and screws.