Chapter 2 Provisioning
Step by Step Installation and Initial Configuration
Step by Step Installation and Initial Configuration
Overview of Installation
The order of installation follows the plan below:
1.Install and configure the Cisco CNS IE2100 appliance with a subnet IP address.
2.On the CMNM host, install the Cisco MGC Node Manager application, including:
a.Voice Services Provisioning Tool.
b.CEMF 3.2.
c.CiscoView upgrade if necessary.
d.Cisco MGC Node Manager (server).
3.On the Cisco PTC/Cisco VRC host, install Cisco PTC, version 2.1.1, integrated with Cisco VRC, version 1.1.
Once the applications are installed, they are started, and then checked for running processes on each machine.
Dependencies
It is highly recommended that you obtain all of the Installation and User Guides referenced in the “Related Documents” section, for Cisco CNS IE2100 Series, CMNM, and Cisco PTC/Cisco VRC. Although lengthy, these guides provide a clear, organized way to approach preparing for, obtaining, and installing the various application software. There are many interdependencies that make the deployment of this management software
You may wonder why the installation information is repeated in this chapter when it is available in the other guides as well. In fact, the installation information in this chapter is mostly copied from the individual User and Installation guides of the different applications adding little that is new or specific to this chapter. The answer is that this chapter is detailing a solution that incorporates at least five different applications and devices. So, instead of pointing you to the many guides, requiring that you either read the guide electronically and activate the various links or much typing of URLs into web browsers, we wish to create a guide that can be accessed either in soft or hard copy that is somewhat complete in itself.
Somewhat complete means that the “official” User and Installation guides cover every situation that the developers could envision, whereas this guide is specifically pointed at a certain solution and deployment and can be less detailed than the guides that accompany the application.
Installing the Cisco CNS IE2100 Configuration Engine
The Cisco CNS Configuration Registrar refers to the application, while the Cisco CNS IE2100 appliance is a specific device that makes use of the application software. The Cisco CNS Configuration Registrar is a self contained, Linux based application, which runs on a one RU, rack mount, IBM host. In preparation for installation, the Cisco CNS IE2100 appliance should be rack mounted and connected to the management network through its Ethernet port.
Cisco Internet OSS for VoIP: Infrastructure Manager Implementation Guide
|
| ||
|
|