321 Studios OL-2706-01 manual Copying Cisco PTC Files From the Product CD

Chapter 2 Provisioning

Step by Step Installation and Initial Configuration

Copying Cisco PTC Files From the Product CD

Step 1 Insert the Cisco PTC product CD into the CDROM drive.

Step 2 Open a X-terminal window and log in as user root.

Step 3 Set the terminal mode to C shell:

ptc-tme# csh

Step 4 Set the DISPLAY environment variable:

ptc-tme#setenv DISPLAY 171.71.73.38:0.0

Step 5 Go to the CDROM directory:

ptc-tme#cd /cdrom/cdrom0

Step 6 Copy the compressed Cisco PTC tar file to the /opt directory and navigate to that directory:

ptc-tme#cp cisco-ptc2.1.1.tar.Z /opt

ptc-tme# cd /opt

Step 7 Uncompress the cisco-ptc2.1.1.tar.Z file:

ptc-tme#uncompress cisco-ptc2.1.1.tar.Z

The tar file is uncompressed creating a cisco-ptc2.1.1.tarfile in the /opt directory.

Step 8 Untar the cisco-ptc2.1.1.tar file:

ptc-tme#tar -xvf cisco-ptc2.1.1.tar

A /opt/PTC-2.1.1directory is created and the Cisco PTC files are placed there.

Step 9 After the tar process completes, delete the cisco-ptc2.1.1.tar file:

ptc-tme#rm cisco-ptc2.1.1.tar

Step 10 Eject the Cisco PTC product CD:

ptc-tme# eject cd

Installing the CNSC CORE Package

This section describes how to install the Cisco PTC CNSC - CORE package. These directions are for a host on which there is no previous installation of Cisco VRC. If this is not the case for your installation, and if you already have Cisco VRC installed on the Cisco PTC host, you must refer to the Cisco Packet Telephony Center Installation and Configuration Guide for instructions on how to properly shut down the Cisco VRC, Cisco CNS, and DCD server processes:

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/ptc/2_1_1/install/install.htm#xtocid14.

Step 11 Assuming Cisco VRC is not present on this host, begin the installation process. Go to the directory where you installed the Cisco PTC product files:

ptc-tme%cd /opt/PTC-2.1.1

Step 12 Make sure the DISPLAY environment variable is set:

ptc-tme%setenv DISPLAY 171.71.150.111:0.0

Step 13 Invoke the Cisco PTC installation script:

ptc-tme% ./cnscInstall

Launching the installation GUI ...

Cisco Internet OSS for VoIP: Infrastructure Manager Implementation Guide

OL-2706-01 2-59