321 Studios OL-2706-01 manual Ptc-tme%pkginfo -l Cnsc

Page 61

Chapter 2 Provisioning

Step by Step Installation and Initial Configuration

Step 14 Click the CNSC - CORE check box.

Only the CNSC - CORE check box should be selected at this time.

Note If you cannot see the bottom of the Cisco PTC Installation window (the Start and Exit buttons), it is likely that your screen resolution is too low. A minimum of 1280x1024 is required.

Step 15 Enter the following information in the Input Parameters fields:

Product Source Directory: /opt/PTC-2.1.1(location of the Cisco PTC install scripts)

Product Install Directory: /opt/vnm (base directory where Cisco PTC must be installed)

Product Admin Password: (Cisco PTC system administrator password - remember this password because you must use the same password for each module that you install. If you get distracted in between module installations, you may forget what password you used.

System Host Name: ptc-tme

VSPT Package Name: CSCOvsp23

Step 16 Click the Start button to invoke the CNSC - CORE package installation process.

The Output log displays the progress of the installation.

Step 17 Upon successful completion of the installation process, click the Exit button.

The Cisco PTC Installation window is closed.

Step 18 Verify the CNSC - CORE package installation was successful by invoking the following command:

ptc-tme%pkginfo -l CNSC

PKGINST:

CNSC

 

NAME:

PTC-2.1.1

CATEGORY:

Application

ARCH:

sparc

 

VERSION:

02_01_18_00

BASEDIR:

/opt/cisco/vnm

VENDOR:

Cisco Systems

PSTAMP:

13thSep2002

INSTDATE:

Sep 24 2002 15:37

EMAIL:

zbigniew@cisco.com

STATUS:

completely installed

FILES:

4419

installed pathnames

 

258

directories

 

1001

executables

 

1

setuid/setgid executables

 

810447

blocks used (approx)

The command output should be “Completely Installed”. If however, the output states “Partially Installed” or an error is returned, you must uninstall the CNSC – COREpackage (refer to the “Uninstalling Cisco PTC Software” section in the Cisco Packet Telephony Center Installation and Configuration Guide) and then attempt to reinstall the CNSC - CORE package again.

Cisco Internet OSS for VoIP: Infrastructure Manager Implementation Guide

 

OL-2706-01

2-61

 

 

 

Image 61
Contents Description ProvisioningTarget Market Scope of the SolutionDocument Purpose Examples of Open Packet Telephony Networks Open Packet Telephony OverviewMgcp Packet Voice Network Virtual Entities in the Network Virtual SwitchMGC CNS NMS ArchitectureIoss Provisioning Component Architecture Interconnection/Interoperability Functional DescriptionCisco Packet Telephony Center Component ListCisco Media Gateway Control Node Manager Cisco Voice Routing CenterLess than Entry level UltraSparcIII 9GB with at leastActive Host Standby Host Cmnm FeaturesCmnm Configuration Cmnm TroubleshootingRecommended Hardware Configuration for Cmnm Recommended Hardware Configuration for Vspt Voice Services Provisioning ToolRecommended Hardware Configuration for CiscoView CiscoViewCisco CNS Intelligence Engine and Cisco CNS Bus Technology Cisco CNS Intelligence EngineHardware Requirements Installing the Cisco CNS IE2100 Configuration Engine Overview of InstallationDependencies Installation Overview PCI PCI Scsi Chapter Provisioning Localhost.localdomain login setup Cisco Intelligence Engine Enter the Secondary DNS Server IP address OL-2706-01 Http//hostname or IP address of IE2100/config/login.html Gathering Installation Software Planning and Installation ChecklistDetermining the Hardware Requirements for Your Environment Installing the Solaris 8 Patch ClusterEnsuring the Network Devices have the Correct Software Ptc-tme#mkdir patches Cnote-tme# ./installclusterPtc-tme#cd patches Host# showrev -p Host# showrev -p grep Dependencies with the following commandsCmnm-pri# hostid Obtaining a Cisco EMF LicenseChecking System Prerequisites Order of InstallationCmnm-pri#nslookup cmnm-pri Cmnm-pri#cd /opt/images cmnm-pri#pwdList the contents of the directory Cmnm-pri# ls -l Untar the contents of the CSCOvspt-2.3.1.tarfileCmnm-pri# ./setup -nodisplay Cmnm-pri# mkdir tmp cmnm-pri# cd tmp cmnm-pri# lsInstallation Summary Following items were installed Cmnm-pri#tar -xvof CSCOvspt-2.3.1-patch-01.tar Untar the contents of the CSCOvspt-2.3.1-patch-01.tarfileOutput suppressed Installing Cemf 3.2 and Available Patches Checking for Package InstallCheck to ensure the entire package was installed Cmnm-pri#cd cdrom/cdrom0 Cmnm-pri# ./cemfinstallIs this setup correct? y y,n,? Cemf Manager Installation OL-2706-01 Page ?-----------output suppressed------------------------? Cemf Patch InstallationList the contents of the current directory Cmnm-pri# ls List the contents of the Patch directory Cmnm-pri# lsNow do the same with Patch Invoke the Cemf installation scriptCmnm-pri#tar -xvof CEMF3.2P3.2.tar Start the Cemf application Starting CemfCmnm-pri#cd /opt/cemf Cmnm-pri#bin/cemf start Before installing CMNM, ensure Cemf is running Installing the Cisco MGC Node ManagerCmnm-pri#cd /opt/cemf Cmnm-pri#bin/cemf query Cmnm-pri#ps -ef grep vold Cmnm-pri#cd /cdrom/cscocmnm Cmnm-pri# ./installCSCOcmnmCmnm-pri# /etc/init.d/volmgt start Output suppressed Verifying class none Installation of CSCOcmnm was successful Opt/cemf/help/CSCOcmnm/cdapp/launched ?-----------------output suppressed-----------------------? ## Reading Package Files Done Output suppressed ## Executing actions Cmnm-pri#pkginfo -l CSCOcmnm Verifying Correct Installation Before ContinuingObtain Cmnm version information Cmnm-pri#bin/cmnmversion -verboseInstalling Cmnm Patches Verifying the Installation of CiscoViewCmnm-pri#pkginfo -l CSCOcmcv Cmnm-pri# ./patchCSCOcmnmStarting Cmnm Verifying Patch Installation SuccessCemf Logo Window # cd /scratch/cvUpgrade Installing Cisco PTC 2.1.1 Integrated with Cisco VRCUpgrading CiscoView Cisco PTC Client RequirementsProduct Prerequisite Cisco PTC Dependencies on Platform VersionsIntegrated Product Component Optional Product Components Installing Cisco PTCCisco PTC Server Installation Pre Installation Checks#pkginfo -l Cnsc #pkginfo l Tibrv Copying Cisco PTC Files From the Product CD Installing the Cnsc Core PackageCnsc Core CNS Integration BUS CNS Security Java Tomcat VRC Ptc-tme%pkginfo -l Cnsc Ptc-tme#pkginfo -l Tibrv Ptc-tme# ./cnscInstallPtc-tme# cd /opt/vnm/common Installing the Java and Tomcat PackagesPtc-tme#pwd /opt/PTC-2.1.1 Ptc-tme# ./cnscInstall Installing the Cisco Voice Routing Center ApplicationPtc-tme#cd /opt/vnm/common Opt/vnm/common/jakarta-tomcat-3.3.1 directory existsIors Ptc-tme#more /.cshrc Installing the Voice Corba Gateway on the Cmnm HostPtc-tme#which share When prompted, enter 1 as the number of EMSsThis is the password to login to the Cmnm host machine Cmnm-tme#ps -ef grep McgNotifyServer Cmnm-tme#ps -ef grep ObjectAccessSynchronizing Cmnm with the SC2200 Cisco PTC Patch Information02011801.tar 02011802.tar 02011804.tar Ptc-tme% dcdstart System StartupVerify the Cisco CNS Security process is running Ptc-tme%ps -ef grep dcx500Ptc-tme%ps -ef grep rvrd Verify the Cisco CNS Integration Bus is runningPage Configuring the Cisco PTC Client Post Installation ConfigurationGo to the /opt/cisco/vnm directory Ptc-tme%cd /opt/cisco/vnmImplementation and Testing OL-2706-01