SECTION
Flow Knob
Ball
FIGURE 5.6 Flowrate
SensO2 Oxygen Purity Indicator (If Your Unit Features the O2 Sensor Feature)
This feature monitors the purity of oxygen generated by the oxygen concentrator. If purity falls below factory preset standards, indicator lights on the control panel will illuminate.
Initial Startup of the Concentrator
NOTE: Concentrator may be used during the initial start
When the unit is turned on, the GREEN light will come on (SYSTEM OK/O2 greater than 85%). After five (5) minutes, the oxygen sensor will be operating normally and will control the indicator lights depending on oxygen concentration values.
Explanation of Oxygen Purity Indicator Lights
NOTE: For this procedure, refer to FIGURE 5.7 on page 30.
GREEN light (O2) - Normal Operation.
Part No 1118353 | 29 | Platinum™Series |