Stop Watch Operation
Your Taylor® thermometer is equipped with a stop watch feature. The stop watch will count up to 59 minutes and 59 seconds, before starting over again at 0. To set the stop watch:
1.Press “Read” button.
2.Press “Mode” button four times, until the clock ( ¹)icon appears on the right side of the screen.
3.Press “Read” button to start the stop watch.
a)For the first 30 minutes, seconds and minutes will count off at the top of the screen. Hundredths of a second will count off in the bottom of the screen.
b)After 30 minutes, hours and minutes will count off at the top of the screen. Tenth of a second will count off in the bottom of the screen.
4.To pause the stop watch, press “Read”. To resume, press “Read” again. To reset the stop watch to zero, press “Mode”. To return to the temperature display, press “Read” to pause the stop watch, then “Mode”.
5.After approximately 30 seconds of stop watch inactivity, the thermometer will automatically return to the temperature/clock display.
Low Battery Warning
Your Taylor® Digital Infrared Thermometer is equipped with a low battery indicator. Replace the battery when “Battery Low” or “Battery Expired” icons appear on the LCD screen.
FULL CHARGE | BATTERY LOW | BATTERY EXPIRED |
Battery Power | Battery Power | Battery Power level |
level is OK and | level is low and | is very low and must |
ready for use | should be replace | be replaced before |
| soon but thermometer | thermometer |
| can still be used | can be used |