Omega Engineering CYD201 and CYD208 Sample Quick Basic 4.0 Program, Input, Returned, Remarks

OMEGA Model CYD201/CYD208 User’s Manual

4.1.4Sample Quick Basic 4.0 Program

STARTUP: OPEN “COM1:300,O,7,1,RS” FOR RANDOM AS #1

		‘open the serial port
	PRINT “TYPE ‘QUIT’ TO EXIT”	‘print ‘QUIT’ message
RESTART: PRINT		‘print blank line
	INPUT “ENTER COMMAND”; A$	‘get command to send
	IF A$ = “QUIT” THEN GOTO FINISH	‘check for quit request
	A$ = A$ + CHR$(13) + CHR$(10)	‘adding CR and LF
	PRINT #1, A$;	‘sending command string
	R = INSTR(A$, “W”)	‘scan for W/query
	IF R = 0 THEN GOTO REJUMP	‘if not query skip print
	FOR Z = 1 TO 500: NEXT Z	‘short delay
	LINE INPUT #1, B$	‘read back CYD201/CYD208 response
	PRINT B$;	‘print instrument response
REJUMP:	GOTO RESTART	‘jump back to beginning
FINISH:	CLOSE #1	‘close serial port
	END	‘end/exit program

4.2SERIAL INTERFACE COMMAND SUMMARY

Command	Function	Command	Function
F0	Sensor Units for Setpoint	Y	Scan Dwell Time *
H	High Alarm Setpoint	YC	Scanner Channel Selection *
L	Low Alarm Setpoint	YH	Scan Disable *
R	Reset Alarm	YS	Scan Enable *
WA	Switch ID & Alarm Data Query	WY	Scan and Dwell Query *
WS	Sensor Reading & Alarm Status Query

* Model CYD208 Only.

Below is an explanation of the command list structure.

Brief Description of Function

Command Name

Syntax of user input.	R	Alarm Reset.
	Input:
		R
Information returned in	Returned:	Nothing
response to query.	Remarks:	Used to reset
Explanation of		the alarm.
returned data.

4-4 Remote Operation