OMEGA Model CYD201/CYD208 User’s Manual
CHAPTER 2
INSTALLATION
2.0GENERAL
This chapter covers Inspection and Unpacking (Paragraph 2.1), Repackaging for Shipment (Paragraph 2.2), Sensor Installation Recommendations (Paragraph 2.3) Power and Ground Requirements (Paragraph 2.4), Sensor Curve Definitions (Paragraph 2.5), and Rack Mounting (Paragraph 2.6).
2.1INSPECTION AND UNPACKING
Remove packing list and verify receipt of all equipment. For question about the shipment, please call OMEGA Customer Service Department at
Upon receipt, inspect container and equipment for damage. Note particularly any evidence of freight damage. Immediately report any damage to the shipping agent
NOTE: The carrier will not honor any claims unless all shipping material is saved for their examination. After examining and removing contents, save packing material and carton in the event reshipment is necessary.
2.2REPACKAGING FOR SHIPMENT
To return the Model CYD201/CYD208, sensor, or accessories for repair or replacement, obtain a Authorized Return (AR) number from Technical Service in the United States, or from the authorized sales/service representative from which the product was purchased. Instruments may not be accepted without a RGA number. When returning an instrument for service, OMEGA must have the following information before attempting any repair.
1.Instrument model and serial number.
2.User name, company, address, and phone number.
3.Malfunction symptoms.
4.Description of system.
5.Authorized Return (AR) number.
Repack the system in its original container (if available). Write AR number on the outside of the container or on the packing slip. If not available, consult OMEGA for shipping and packing instructions.
Installation |