Operating Instructions
Preparing the Nebulizer for Use
WARNING
•Clean and disinfect the nebulizer kit, mouthpiece, and optional nosepiece or optional masks before using them for the first time after purchase.
•If the device has not been used for a long period of time, or if more than one person uses the same device, clean and disinfect the nebulizer kit, mouthpiece, and optional nosepiece or optional masks before using them.
CAUTION
Make sure the air filter is clean. If the air filter has changed color or has been used on average for more than 60 days, replace it with a new one.
For directions on cleaning and disinfecting refer to page 18 - 19. For directions on changing the air filter refer to page 20.
1 Insert the power plug on the AC adapter into the power connector on the back side of the compressor. Plug the AC adapter into the electrical outlet.
WARNING
Do not plug or unplug the AC adapter into the electrical outlet with wet hands.
CAUTION
•Do not overload power outlets. Plug the AC adapter into the appropriate voltage outlet.
•Do not use extension cords. Plug the AC adapter directly into the electrical outlet.
Power Plug
Power Connector
Electrical Outlet
NOTE: AC adapter can be worked at 100 - 240V ~ 350mA, 50/60 Hz.
2Lift up the mouthpiece and the cap to remove them from the nebulizer kit.
11