Sunrise Medical Ruby, Garnet XII. Maintenance, Cleaning, Storage Tips, Battery Maintenance

X I I . M a i n t e n a n c e E n g l i s h 31

XII. MAINTENANCE

A.NOTES

1.Proper maintenance will improve performance and extend the useful life of your chair/scooter.

2.Clean your chair/scooter regularly. This will help you find loose or worn parts and will make your chair/scooter easier to use.

3.To protect your investment, have all major service and repair work done by your sup- plier.

1.Your chair/scooter needs regular maintenance for peak performance and to avoid injury from chair/scooter failure, damage or premature wear.

2.Inspect and maintain this chair/scooter strictly per the “Maintenance Chart”.

3.If you detect a problem, make sure to service or repair the chair/scooter before use.

4.At least once a year, have a complete safety check and service of your chair/scooter performed by a supplier.

B.CLEANING

1.Frame:

•Clean the frame with mild soapy water monthly.

2.Motors:

•Clean around motor area weekly with a slightly damp (not wet) cloth.

•Wipe off or blow away any fluff, dust, or dirt on or around the motors.

•Note: You do not need to grease or oil the chair/scooter.

3.Upholstery:

•Hand-wash only as needed. Machine washing may damage fabric (rehab seat only).

•Drip-dry only. Heat from a dryer may damage fabric.

NOTE– Washing the fabric may decrease fire retardant properties.

C.STORAGE TIPS

1.Store your chair/scooter in a clean, dry area. If you fail to do so, parts may rust or corrode.

2.Before using your chair/scooter, make sure it is in proper working order. Inspect and service all items on the “Maintenance Chart”.

3.If you store this chair/scooter for more than three months, have it inspected by a supplier before use.

D.BATTERY MAINTENANCE

1.To prevent an acid spill, always keep batteries upright. (wet cell batteries)

2.Never smoke or hold an open flame near batteries.

3.Always wear rubber gloves and safety glasses when you handle batteries.

1. Maintenance Schedule:

This varies for different types of batteries. Always follow the instructions supplied with your batteries.

NOTE– Always wear rubber gloves and safety glasses when you handle or service batteries.

3. Corrosion:

Check battery terminals often for corrosion.

a.If corrosion is present, use a wire brush to clean the terminals.

NOTE– Always wear safety glasses and rubber gloves.

b.Use baking soda to neutralize acid.

c.Use petroleum jelly to re-grease the terminals after connecting cables to battery. (Completely cover the terminal nut and bolt, cable clip and any exposed cable with jelly).

4.For Answers To Questions: Contact your supplier.

930705 Rev. B